Store

DFRobot

$67.57 |
In stock at supplier
No reviews yet

This highly integrated QR code scanner with excellent performance can recognize common 1D codes and 2D codes. With a small size, it employs easy-to-connect G...

Stock availability

Available with leadtime
59 available
Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

This highly integrated QR code scanner with excellent performance can recognize common 1D codes and 2D codes. With a small size, it employs easy-to-connect Gravity Interface and is equipped with a colorful indicator that feeds back the sensor recognition status by showing different colors.

Board-Overview

Operating at 3.3V/5V, the scanner is compatible with UART and I2C communication, which makes it easier to develop on controllers like Arduino, ESP32, Raspberry Pi, etc.

Connection-Diagram with DFRduino UNO R3

It can be used in self-service vending machines, subway gates, access control, payment machines, etc.


Features

  • Use-to-connect Gravity interface
  • 3.3V/5V power supply
  • I2C & UART supported

  • Applications
  • Self-service vending machines
  • Subway gates
  • Access control
  • Payment machines

  • Specification
  • Power Supply: DC3.3V/5V
  • Working Current: <70mA
  • Communication: I2C, UART
  • Image Pixel: 640*480
  • Light Source: colorful indicator/green light flashing prompt successful reading
  • Code System: 1D: EAN13, EAN8, UPCA, UPCE0, UPCE1, Code128, Code39, Code93, CodeBar, Interleaved 2 of 5
  •       2D: QR code, Data Matrix, PDF417

  • Depth of Field: QR Code (25mm-150mm product performance may be affected to varying degrees due to barcode quality and environmental conditions)
  • Contrast: ≥25%
  • Reading Angle: roll 360°, pitch 55°, yaw 55°
  • Scanning Angle: 69° (horizontal), 56° (vertical)
  • Reading Accuracy: ≥5mil
  • Working Temperature: 20°C ~60°C
  • Storage Temperature: -40°C ~80°C
  • Environment Light: 0~100000Lux
  • Relative Humidity: 5% to 95% (non-condensing)

  • Documents
  • Product wiki

  • Shipping List
  • Ring 2D QR Code Scanner x1
  • Adapter Board x1
  • PH2.0-4P Dupont Wire 30cm(Red Black Blue Green) x1
  • Jargon buster

    Plain-language definitions for the technical terms used above.

    ESP32
    ESP32 is a family of microcontroller modules with built-in wireless features such as Bluetooth and WiFi. Knowing this product uses an ESP32-based module helps explain how it provides wireless serial communication and firmware update features.
    Gravity
    Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
    I2C
    I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
    UART
    UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.

    Supplier page — dfrobot.com

    Supplier Description · 224.5 KB · Click any page to view full size

    Download PDF
    Stella
    Stella Expert

    Ask me anything about this product

    Maddy, co-founder of Little Bird

    Need help? We're here for you!

    Hi, I'm Maddy. My team and I are ready to help with your order or any questions.