DFRobot
Gravity: Intermediate(advanced) Kit for Arduino
The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. S...
The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more complex builds like a mini electronic drum kit, sound-activated LED, and digital dice, this kit teaches electronics theory and physical computing through hands-on projects.
An illustrated guide from the DFRobot R&D team walks you through each project with sample code and explanations of how each component works.
Key Features
- 20+ Components – Sensors, actuators, display, and Arduino-compatible board included
- Project-Based Learning – Guided projects from simple to advanced
- Illustrated Guide – Step-by-step instructions with sample code
- Gravity Interface – Plug-and-play sensor connections via IO Expansion Shield
Ideal For
- Electronics hobbyists moving beyond beginner kits
- School and classroom STEM education
- Learning Arduino sensor integration and physical computing
Package Contents
- 1× DFRduino UNO Rev3 (DFR0216)
- 1× IO Expansion Shield V7 (DFR0265)
- 1× Digital Relay Module (DFR0017)
- 1× Analog Ambient Light Sensor (DFR0026)
- 1× Digital Vibration Sensor (DFR0027)
- 1× Digital Push Button (DFR0029-Y)
- 1× Digital Piranha LED Module – Red (DFR0031-R)
- 1× Digital Buzzer Module (DFR0032)
- 1× Analog Sound Sensor (DFR0034)
- 1× Digital Piezo Disk Vibration Sensor (DFR0052)
- 1× Analog Rotation Sensor V1 (DFR0054)
- 1× I2C/TWI LCD1602 Module (DFR0063)
- 1× DHT11 Temperature & Humidity Sensor (DFR0067)
- 1× Shiftout Module (DFR0072)
- 1× Analog Flame Sensor (DFR0076)
- 1× IR Remote Kit (DFR0107)
- 1× Digital Infrared Motion Sensor (SEN0018)
- 1× Analog Gas Sensor – MQ2 (SEN0127)
- 1× 9g Micro Servo – 1.6 kg (SER0006)
- 5× Jumper Wires 9″ F/F
- 1× USB Cable A-B
- 1× 6×AA Battery Holder with DC2.1 Power Jack
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- Ambient light sensor
- A sensor that measures the general brightness of light falling on it, similar to how a device can adjust screen brightness automatically. It matters when you want a project to react to room lighting, daylight, shadows, or covered/uncovered conditions.
- Gravity
- Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
- Shield
- An add-on board that plugs into a main controller board to give it extra features such as sensing, motor control or communication. Knowing a product supports shields helps you judge whether it can connect neatly into an existing maker-board setup.
Find this product in
Brands
STEM & Education
CE Certificate
Compliance · 613.8 KB · Click any page to view full size
RoHS Certificate
Compliance · 742.5 KB · Click any page to view full size
Supplier page — dfrobot.com
Supplier Description · 1.4 MB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
