DFRobot
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage po...
Get notified when back in stock
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.
This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the corresponding pads on the back. It withstands up to 5A load current with suitable heat dissipation and has 70°C over-temperature and overload protections. Besides, there is an onboard LED indicator that shows a solid red light when everything works fine and goes out when the protection mechanism is triggered and the voltage automatically drops to 0.1V.
The multi-voltage buck power module can be used in power control systems for LEDs, robots, drones, servos, low-power motors, and so on.
Instruction
This module outputs 5V by default and the corresponding 5V solder pad is short-circuited. To output other voltages, for instance, 3.3V, please disconnect the 5V pad and short circuit the 3.3V solder pad.
Note: Since this is a step-down converter, the input voltage should be larger than the output, and it works better with a voltage difference of 2V and above.
Features
Applications
Specification
9V/0~2.5A 12V/0~3A
9V/3.5A (31.5W) 12V/3.5A (42W)
Shipping List
Find this product in
Power & Batteries
Supplier page — dfrobot.com
Supplier Description · 737.0 KB · Click any page to view full size
You might also like
Customers who bought this also bought
Hook-up Wire - Yellow (22 AWG)
$7.40
Female DC Power adapter - 2.1mm jack to screw terminal block
$4.00
ESP8285 DT-06 Wifi to TTL
$13.75
74AHCT125 - Quad Level-Shifter (3V to 5V) [74AHCT125]
$3.15
60W Adjustable DC-DC Buck Converter Module
$17.25
128x128, General 1.5inch OLED display Module
$22.45
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM
$43.30
Fermion: DS3231 Precise RTC (Breakout)
$19.58
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.