DFRobot
Bluno Beetle Shield
INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and gro...
INTRODUCTION
The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity interface modules. It also includes a convenient external power supply and a 5-8v switch to power the board on and off. To use the shield, the Bluno Beetle is stacked on to the shield's I/O pins and then soldered in place.
FEATURES
- Digital I/O Pins x4: D2-D5
- Analog Input Pins x4: A0-A3
- Vin input range: 5-8v
- Mounting Holes x4 (3mm diameter)
- Power Switch
DOCUMENTS
SHIPPING LIST
- Bluno Beetle Shield x1
Jargon buster
Plain-language definitions for the technical terms used above.
- Gravity
- Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
- Shield
- An add-on board that plugs into a main controller board to give it extra features such as sensing, motor control or communication. Knowing a product supports shields helps you judge whether it can connect neatly into an existing maker-board setup.
Find this product in
Bluno Beetle Shield Schematic
Schematic · 50.7 KB · Click any page to view full size
Bluno Beetle Shield PCB Layout
Mechanical Drawings · 95.6 KB · Click any page to view full size
Supplier page — dfrobot.com
Supplier Description · 617.6 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
