DFRobot
Arduino Project Enclosure
The Arduino enclosure allows you to easily enclose your Arduino main board, Arduino Mega, or any other board that fits the Arduino foot print (FEZ Domino, F...
Get notified when back in stock
The Arduino enclosure allows you to easily enclose your Arduino main board, Arduino Mega, or any other board that fits the Arduino foot print (FEZ Domino, FEZ Panda, Netduino, etc). It simply presses shut, so you don't have to worry about screws or fasteners.
It has room internally for an Arduino and a shield. It even has a removable tab mated for use with an Ethernet shield. It also has a snap-in compartment in the back for accessing switches or connections or battery access.
Note: Some older Arduino boards have a slightly smaller hole near the rear the ICSP connector. To make the case work with these boards simply drill out the hole to 1/8" and you will be fine. Also, with the newer Ethernet Shields, you will need to remove one of the pegs to get everything to fit correctly.
SPECIFICATIONS
- Size:87x64x28mm(3.4x2.5x1.1'')
Jargon buster
Plain-language definitions for the technical terms used above.
- ICSP connector
- An In-Circuit Serial Programming connector is a header used to reprogram a microcontroller directly with a programmer. It matters if you want advanced control, bootloader recovery, or to program the board without using the normal USB method.
- Shield
- An add-on board that plugs into a main controller board to give it extra features such as sensing, motor control or communication. Knowing a product supports shields helps you judge whether it can connect neatly into an existing maker-board setup.
Find this product in
Brands
Prototyping & Wiring
Related Tutorials
Free step-by-step guides
