DFRobot
64x32 Flexible RGB LED Matrix-5mm Pitch
The 64×32 Flexible RGB LED Matrix with 5mm pitch from DFRobot offers a lightweight, bendable display with 2048 individually addressable RGB LEDs. Its flexibl...
Get notified when back in stock
The 64×32 Flexible RGB LED Matrix with 5mm pitch from DFRobot offers a lightweight, bendable display with 2048 individually addressable RGB LEDs. Its flexible PCB allows it to conform to curved surfaces, making it ideal for creative installations where rigid panels won't fit.
The matrix features two IDC connectors (DATA_IN and DATA_OUT) on the back for daisy-chaining multiple panels into larger displays. It requires a high-speed microcontroller with sufficient RAM — an Arduino Uno is not suitable. Use a Raspberry Pi, Arduino Mega, or similar board with ample memory and processing power.
Key Features
- Flexible Design – Bendable PCB conforms to curved surfaces and non-flat installations
- 5mm Pixel Pitch – Optimal viewing distance of 5–58 metres
- 2048 RGB LEDs – 64×32 resolution with full-colour output
- Chainable – IDC input/output connectors allow multiple panels to be daisy-chained
- Wide Viewing Angle – 160° or greater for clear visibility from the side
- High Refresh Rate – 500 Hz or greater with 360 Hz+ repetition frequency
Specifications
- Pixel Pitch: 5mm
- Resolution: 64×32 (2048 dots)
- Operating Voltage: 5V
- Maximum Power Consumption: ≤12W
- Refresh Frequency: ≥500 Hz
- Repetition Frequency: ≥360 Hz
- Viewing Angle: ≥160°
- Dimensions: 320×160mm
Also Available
- 64×32 Flexible RGB LED Matrix – 4mm Pitch (Adafruit)
- 64×32 Flexible RGB LED Matrix – 4mm Pitch (DFRobot)
- 64×32 Flexible RGB LED Matrix – 5mm Pitch (Adafruit)
- 64×32 RGB LED Matrix – 2.5mm Pitch (Rigid)
- 64×32 RGB LED Matrix – 3mm Pitch (Rigid)
- 64×32 RGB LED Matrix – 4mm Pitch (Rigid)
- 64×32 RGB LED Matrix Panel – 4mm Pitch (Rigid)
- 64×32 RGB LED Matrix – 5mm Pitch (Rigid)
- 64×32 RGB LED Matrix – 6mm Pitch (Rigid)
Ideal For
- Curved or cylindrical display installations
- Wearable or portable LED signage
- Creative art and lighting projects
- Multi-panel video walls on non-flat surfaces
Package Contents
- 1× 64×32 Flexible RGB LED Matrix (5mm pitch)
Jargon buster
Plain-language definitions for the technical terms used above.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- microcontroller
- A microcontroller is a small computer on a single chip that runs a stored program and controls connected inputs and outputs such as buttons, sensors, displays and communication interfaces. In a device built around one, it is the part that executes the code and coordinates the device's behaviour.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
- RAM
- RAM (random-access memory) is fast, temporary memory a device uses for working data while it is running; in its common volatile form, its contents are lost when power is removed. Some devices offer a mode that applies settings to RAM only, which is handy for testing changes temporarily because they are not stored permanently and disappear at power-off.
- RGB
- Short for red, green and blue, the three primary colours of light that are mixed in varying amounts to make a wide range of colours. In electronics RGB can refer to an LED or pixel that blends these three colours, or to a colour signal or interface that carries separate red, green and blue channels.
Find this product in
Brands
Displays & Screens
Related Tutorials
Free guides on learn.littlebird.com.au
