Fast delivery
It's just a simple cable so not much to say about that, but the order was packed and shipped right away so it arrived here in FNQ very quickly.
Simon Wilks
Adafruit
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
All Products
Headers & Connectors
New Arrivals
Raspberry Pi Pico Cables and Connectors
Circuitry & IOT
Jumpers & Wires
Prototyping
Digital Technologies
Components
$2.85
|
In stock
A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click f...
Get notified when back in stock
Estimated Delivery
Arrives
Order within 13h 32m for same-day dispatch
Disclaimer
Secure checkout
A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky.
This cable uses 1:N reversed wiring, meaning pin 1 on one connector maps to pin 8 on the other, pin 2 to pin 7, and so on. Molex PicoBlade compatible.
Key Features
- 1.25 mm Pitch Connectors – Ultra-slim profile for space-constrained builds
- 1:N Reversed Wiring – Pin order is mirrored from one end to the other
- Friction-Lock Mechanism – Secure, click-in connection that won't pull loose
- 20 cm Length – Convenient short-run cable for internal wiring
- 8 Pins – Suitable for multi-signal connections
- Molex PicoBlade Compatible – Works with standard 1.25 mm pitch connectors
Ideal For
- Connecting breakout boards and sensors with 1.25 mm pitch headers
- Internal wiring in compact enclosures and portable projects
- Replacing bulkier JST PH or 0.1" dupont connections
Package Contents
- 1× 1.25 mm pitch 8-pin cable (20 cm, 1:N wiring)
Note: This cable uses 1:N (reversed) wiring. Pin 1 connects to pin 8, pin 2 to pin 7, etc. If you need straight-through 1:1 wiring, check the 1:1 cable variants.
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- JST PH
- A small keyed plug-and-socket connector with 2 mm pin spacing, often used for low-power electronics connections. You need the correct JST PH cable, and its current rating limits how much power should be passed through it.
- pH
- A measure of how acidic or alkaline a liquid is, on a scale from 0 to 14 where 7 is neutral, lower is acidic and higher is alkaline. When a probe or sensor quotes a pH range and accuracy, check they cover the readings your project needs.
Find this product in
All Products
Circuitry & IOT
Headers & Connectors
New Arrivals
Raspberry Pi Pico Cables and Connectors
Prototyping & Wiring
Related Tutorials
Free step-by-step guides
