Wearable Tech & E-textiles
Explore our range of wearable tech and e-textile supplies, from conductive thread and fabric tape to sewable NFC tags, EL wire, coin cell breakouts, and LilyPad-compatible components. Everything you need to build interactive garments and smart accessories.
Perfect for makers, fashion tech students, STEM educators, and anyone exploring the intersection of electronics and textiles. All products ship from Australia with fast delivery nationwide.
Power Supply Module AAA Battery Step up to 5V Converter for E-Textiles
SKU: LB-AAA-BATTERY | Brand: Little Bird
A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...
Delivered by Thu 11 Jun
SparkFun Single Lead Heart Rate Monitor - AD8232
SKU: SF-SEN-12650 | Brand: SparkFun
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...
Delivered by Thu 11 Jun
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Mon 22 Jun
MyoWare 2.0 Power Shield
SKU: SF-DEV-21868 | Brand: SparkFun
The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...
Delivered by Mon 22 Jun
MyoWare 2.0 Cable Shield
SKU: SF-DEV-18386 | Brand: SparkFun
The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away fro...
Delivered by Mon 22 Jun
MyoWare 2.0 Link Shield
SKU: SF-DEV-18425 | Brand: SparkFun
The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a...
Delivered by Mon 22 Jun
Adafruit LED Glasses Driver - nRF52840 Sensor Board
SKU: AF-5217 | Brand: Adafruit
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...
Delivered by Wed 1 Jul
Mini Heart Rate Unit (MAX30100)
SKU: M5-U029 | Brand: Little Bird
Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides ...
Out of stock
MyoWare 2.0 Wireless Shield
SKU: SF-DEV-23387 | Brand: SparkFun
The MyoWare® 2.0 Wireless Shield is designed to take in readings from the MyoWare 2.0 Muscle Sensor and wirelessly transmit sensor data with the ESP32-WROOM! This shield also includes a built-in LiPo battery to remote...
Out of stock
Adafruit LED Glasses Front Panel - 116 RGB LEDs with I2C Driver
SKU: AF-5210 | Brand: Adafruit
The Adafruit LED Glasses Front Panel features 116 artfully arranged 2×2 mm RGB LEDs controlled by an IS31FL3741 I2C driver chip. Simply connect it via STEMMA QT to your favourite microcontroller and start creating daz...
Out of stock
MyoWare Muscle Sensor
SKU: PI-AT-04-001 | Brand: Pimoroni
The MyoWare Muscle Sensor is an all-in-one electromyography (EMG) sensor that measures the filtered and rectified electrical activity of a muscle. It outputs 0 V to Vs (supply voltage) depending on the level of activi...
Out of stock
