Wearable Tech & E-textiles

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: LB-ETEXTILEADXL335 | Brand: Little Bird

  This is a three axis accelerometer designed for E-Textiles. Based on the ADXL335 MEMS accelerometer from Analog Devices, this Accelerometer can detect joint movement as well as inclination and vibration. The ...

SKU: SF-SEN-12650 | Brand: SparkFun

The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...

SKU: LB-TINY | Brand: Little Bird

The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: SF-DEV-18426 | Brand: SparkFun

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...

SKU: SF-DEV-21868 | Brand: SparkFun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...

SKU: SF-DEV-18386 | Brand: SparkFun

The MyoWare® 2.0 Muscle Sensor is designed to be wearable, allowing you to attach biomedical sensor pads directly to the board itself. However, there still may be cases where you want to mount the sensor pads away fro...

SKU: SF-DEV-18425 | Brand: SparkFun

The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a...

SKU: AF-5217 | Brand: Adafruit

The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: M5-U029 | Brand: Little Bird

Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides ...

SKU: SF-DEV-23387 | Brand: SparkFun

The MyoWare® 2.0 Wireless Shield is designed to take in readings from the MyoWare 2.0 Muscle Sensor and wirelessly transmit sensor data with the ESP32-WROOM! This shield also includes a built-in LiPo battery to remote...

SKU: AF-5210 | Brand: Adafruit

The Adafruit LED Glasses Front Panel features 116 artfully arranged 2×2 mm RGB LEDs controlled by an IS31FL3741 I2C driver chip. Simply connect it via STEMMA QT to your favourite microcontroller and start creating daz...

SKU: PI-AT-04-001 | Brand: Pimoroni

The MyoWare Muscle Sensor is an all-in-one electromyography (EMG) sensor that measures the filtered and rectified electrical activity of a muscle. It outputs 0 V to Vs (supply voltage) depending on the level of activi...