USB Cables

SKU: DF-FIT0414 | Brand: DFRobot

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable. WRTnode(A Mini Op...

SKU: DF-FIT0416 | Brand: DFRobot

Introduction This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an external crystal oscillator, has high stability and str...

SKU: AF-3318 | Brand: Adafruit

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, Be...

SKU: AF-1826 | Brand: Adafruit

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snap...

SKU: DF-DFR0065 | Brand: DFRobot

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for gene...

SKU: AF-908 | Brand: Adafruit

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box.The j...

SKU: DF-FIT0975 | Brand: DFRobot

##Introduction This power cord is specially designed for LattePanda Sigma users and can provide stable power supply to Sigma. One end of the cable adopts an ATX-24Pin chassis power connector for connecting to the chas...

SKU: DF-FIT0953 | Brand: DFRobot

##Introduction This product is a carefully selected cable designed for Type-C port conversion on UNIHIKER M10. It is made of silicone material and features a flat, flexible ribbon cable design. With its ultra-thin and...

SKU: AF-6071 | Brand: Adafruit

This panel mount cable is great for making USB Host or (some) client connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the other end has power, ground and D+ / D- lines. We...

SKU: AF-6069 | Brand: Adafruit

If you need to add a compact panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB C Small Round Panel Mount Extension Cable is the easiest and fastest way to panel-if...

SKU: AF-6029 | Brand: Adafruit

Everyone has that "good charger" in the house, which seems to get your phone from 4% to 100% in record time. But it's a bit of a mystery, isn't it? Why does one charger work great while another doesn't seem to budge a...

SKU: SF-CAB-25070 | Brand: SparkFun

This custom-designed OBD-II cable from Macchina functions as both a splitter and at about one meter (~39 inches) in length, as an OBD-II extension cable. Unlike other cables out there, all 16 pins connected between ea...

SKU: AF-5993 | Brand: Adafruit

The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal for breadboard use and enclosure mounting. Two 5.1K resistor...

SKU: AF-5978 | Brand: Adafruit

The Adafruit USB Type C Plug Breakout gives you easy access to the pins on a USB-C plug connector, making it simple to add a USB-C connection to your projects. A 5.1K resistor on the CC1 pin signals the upstream host ...

SKU: SF-CAB-24060 | Brand: SparkFun

A 3-metre USB-C to USB-C power charging cable with a flexible, tangle-free silicone coating. The generous length provides plenty of reach for powering development boards, single-board computers, and other USB-C device...

SKU: SF-CAB-21271 | Brand: SparkFun

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB...

SKU: AF-5461 | Brand: Adafruit

This compact microadapter converts a USB Type-A port into a USB-C socket, letting you connect USB-C cables to older computers, laptops, and hubs that only have USB-A ports. The adapter supports USB 1.1 and USB 2.0 da...

SKU: AF-5446 | Brand: Adafruit

This USB Type C cable adds a DB-9 (DE-9) serial port to your computer or laptop. Works with MacOS X, Linux, and Windows. Note that this provides (approximately) +-6V serial (RS232) not 5V serial (TTL), good for old de...

SKU: AF-5462 | Brand: Adafruit

Connect this to that when an 18-pin FPC connector is needed. This 50mm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! We...

SKU: AF-4449 | Brand: Adafruit

If you'd like to connect a USB-host-capable chip to your USB peripheral, this cable will make the task very simple. There is no converter chip in this cable! It's basically a plain USB cable that's cut in ha...