Temperature Sensors

SKU: AF-4375 | Brand: Adafruit

A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitorin...

SKU: AF-5182 | Brand: Adafruit

The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...

SKU: AF-4832 | Brand: Adafruit

The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH...

SKU: DF-SEN0254 | Brand: DFRobot

The TC01 is a non-contact infrared temperature sensor with a 16×4 pixel array, producing a 64-pixel thermal image. Housed in a waterproof, dustproof metal enclosure (IP65), it communicates via RS485 using the standard...

SKU: AF-4099 | Brand: Adafruit

Take your next outdoor sensor project to the next level with this SHT-30 based temperature/humidity sensor. The sensor includes a dual-use sensor module from Sensiron in a sintered metal mesh encasing. The casing is w...

SKU: PI-COM1700 | Brand: Pimoroni

The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...

SKU: DF-SEN0248 | Brand: DFRobot

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatil...

SKU: SF-SEN-12064 | Brand: SparkFun

The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for a weather stations or humidor control sy...

SKU: DF-SEN0227 | Brand: DFRobot

This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test...

SKU: SF-SEN-14348 | Brand: SparkFun

The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. This unique breakout provides a variety of environmental data, i...

SKU: AF-2738 | Brand: Adafruit

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘As...

SKU: SF-SEN-13266 | Brand: SparkFun

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...

SKU: AF-386 | Brand: Adafruit

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no an...

SKU: AF-576 | Brand: Adafruit

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: KI-5038 | Brand: Kitronik

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an o...

SKU: AF-6331 | Brand: Adafruit

The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...

SKU: AF-5964 | Brand: Adafruit

The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...

SKU: SF-SEN-22858 | Brand: SparkFun

A combined air quality and environmental sensor breakout featuring the ENS160 (air quality index, eCO2, TVOCs) and BME280 (temperature, humidity, barometric pressure) on a single Qwiic-enabled board. The two sensors w...

SKU: SF-SEN-22395 | Brand: SparkFun

The SparkFun SCD40 breakout board measures CO₂ concentration, humidity, and temperature using Sensirion's PASens photoacoustic measurement technology. The sensor detects CO₂ from 0 to 40,000 ppm with high accuracy ove...