Temperature Sensors

SKU: AF-3263 | Brand: Adafruit

The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +18...

SKU: DF-SEN0511 | Brand: DFRobot

This waterproof DS18B20 digital temperature sensor delivers accurate readings over a simple 1-Wire interface, requiring just a single data pin on your microcontroller. The sealed probe and silicone lead wire make it i...

SKU: AF-4821 | Brand: Adafruit

The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...

SKU: DF-SEN0254 | Brand: DFRobot

The TC01 is a non-contact infrared temperature sensor with a 16×4 pixel array, producing a 64-pixel thermal image. Housed in a waterproof, dustproof metal enclosure (IP65), it communicates via RS485 using the standard...

SKU: SF-SEN-13266 | Brand: SparkFun

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: AF-6331 | Brand: Adafruit

The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...

SKU: AF-5971 | Brand: Adafruit

The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...

SKU: AF-5964 | Brand: Adafruit

The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...

SKU: SF-SEN-22858 | Brand: SparkFun

A combined air quality and environmental sensor breakout featuring the ENS160 (air quality index, eCO2, TVOCs) and BME280 (temperature, humidity, barometric pressure) on a single Qwiic-enabled board. The two sensors w...

SKU: SF-SEN-21262 | Brand: SparkFun

The SparkFun STTS22H is a Qwiic-enabled temperature sensor breakout based on ST Microelectronics' ultralow-power, high-accuracy digital temperature sensor. Factory calibrated to ±0.5°C accuracy without any application...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: AF-4089 | Brand: Adafruit

Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...