SparkFun

SKU: SF-COM-11951 | Brand: SparkFun

A small aluminium control knob with markings that go to eleven. Fits potentiometers with a 6mm shaft diameter using a brass insert with a set screw for secure attachment. Specifications Dimensions – 23.6 × 14.2mm ...

SKU: SF-COM-00746 | Brand: SparkFun

A 10 F (farad) supercapacitor rated at 2.5 V. This compact energy storage device can be charged and slowly discharged to power low-current systems for extended periods. Two can be connected in series for 5 F at 5 V. ...

SKU: SF-DEV-13907 | Brand: SparkFun

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that...

SKU: SF-COM-00597 | Brand: SparkFun

Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V).Documents:Datasheet

SKU: SF-PRT-00548 | Brand: SparkFun

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand sol...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: SF-SEN-11828 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simpl...

SKU: SF-SEN-11827 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simpl...

SKU: SF-PRT-13867 | Brand: SparkFun

A small, adjustable parts box for organising components, breakout boards, and development boards. Made from clear polypropylene with reliable locking tabs, it's durable and water-resistant. Six included dividers let y...

SKU: SF-CAB-00507 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" Long

SKU: SF-CAB-00508 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with stress relief sleeves. Dimensions: 36" long

SKU: SF-PRT-11796 | Brand: SparkFun

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. ...

SKU: SF-BOB-11771 | Brand: SparkFun

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing. This 4-bit noninverting translator uses two separate...

SKU: SF-CEL-00290 | Brand: SparkFun

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standar...

SKU: SF-SEN-00242 | Brand: SparkFun

The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure ...

SKU: SF-BOB-13830 | Brand: SparkFun

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boa...

SKU: SF-PRT-11710 | Brand: SparkFun

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of stranded wire but will fit directly onto male pin headers. The only down...

SKU: SF-PRT-11709 | Brand: SparkFun

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin head...

SKU: SF-WRL-11697 | Brand: SparkFun

This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the ...

SKU: SF-PRT-00111 | Brand: SparkFun

A standard alligator clip — an essential tool for any electronics workbench. Use it for making quick temporary connections when prototyping circuits, testing components, or extending test leads. Ideal For Prototypin...