Raspberry Pi

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: AF-2883 | Brand: Adafruit

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, li...

SKU: SF-COM-00299 | Brand: SparkFun

The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus ...

SKU: AF-3008 | Brand: Adafruit

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Eac...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: AF-3464 | Brand: Adafruit

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as...

SKU: AF-3531 | Brand: Adafruit

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...

SKU: SF-COM-09479 | Brand: SparkFun

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a stagge...

SKU: SF-PRT-09385 | Brand: SparkFun

A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them vers...

SKU: AF-3589 | Brand: Adafruit

The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, g...

SKU: PR-PIM377 | Brand: Little Bird

Grow your projects on Breakout Garden. It's the easiest way to use breakouts with your Raspberry Pi. There's no soldering required, just pop up to six Pimoroni breakouts into the slots on Breakout Garden and get st...

SKU: WS-31418 | Brand: Waveshare

A 12.3-inch IPS touch display with a 720×1920 portrait-mode resolution that connects directly via DSI (Display Serial Interface). The 10-point capacitive touch panel uses I2C, and the toughened glass with optical bond...

SKU: PH-106473 | Brand: PiHut

The KKSB Display Stand combines an adjustable stand with a secure metal case, designed specifically for the Raspberry Pi 5 and Official Raspberry Pi Touch Display 2. A 360° ball joint enables full rotation for flexibl...

SKU: DF-TEL0185 | Brand: DFRobot

Introduction RainbowLink is a high-performance USB protocol converter designed for multi-channel serial communication and power output, making it ideal for IoT and industrial applications. It integrates four independe...

SKU: DF-DFR0959 | Brand: DFRobot

Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation inst...

SKU: AF-6036 | Brand: Adafruit

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 20cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforwa...

SKU: AF-5967 | Brand: Adafruit

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It al...

SKU: AF-5907 | Brand: Adafruit

The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...

SKU: PR-PIM661 | Brand: Little Bird

A compact Pico W powered E Ink® photo frame / home dashboard / life organiser with super concentrated seven colour display and wireless connectivity. Inky Frame 4.0" features a vibrant E Ink display with 640 x 400 p...

SKU: KI-5347 | Brand: Kitronik

The Kitronik ZIP96 is a fully programmable retro-styled handheld gaming platform for the Raspberry Pi Pico. It features a 96 addressable colour LED display (12×8 grid), a buzzer for audio, a vibration motor for haptic...