Raspberry Pi

SKU: DF-SEN0629 | Brand: DFRobot

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...

SKU: DF-FIT0991 | Brand: DFRobot

The Argon NEO 5 BRED is a polished aluminium case for the Raspberry Pi 5, combining passive heatsink cooling with an integrated active cooling fan. Cold air enters through intake vents and the fan circulates airflow t...

SKU: WS-29361 | Brand: Waveshare

The Waveshare RP2350-Zero is a compact development board built around the Raspberry Pi RP2350A microcontroller. It features a dual-core Arm Cortex-M33 processor alongside a dual-core Hazard3 RISC-V processor, clocked ...

SKU: DF-DFR1170 | Brand: DFRobot

The DFRobot 10.5" LED Touch Portable Monitor delivers crisp 1920×1280 visuals on an IPS panel with LED backlighting, 400 cd/m² brightness, and a 1500:1 contrast ratio. The fully laminated 10-point capacitive touch scr...

SKU: AF-5945 | Brand: Adafruit

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...

SKU: AF-5930 | Brand: Adafruit

A PCIe flex cable (PCIe Pipe) for connecting the Pimoroni NVMe Base to a Raspberry Pi 5. The cable features a keyed design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end, preventing incorrect ...

SKU: WS-25349 | Brand: Waveshare

The SIM7028 NB-IoT HAT is a compact, low-power Raspberry Pi expansion board with NB-IoT (Narrow-Band Internet of Things) connectivity. It supports global NB-IoT bands and a wide range of communication protocols includ...

SKU: WS-25288 | Brand: Waveshare

Long-wave IR Thermal Imaging Camera Module, 80×62 Pixels, 45°FOV, Available with 40PIN GPIO Header or Type-C PortLong-wave IR Thermal Imaging Camera Module 80×62 Pixels IR Array  Small Size | Non-c...

SKU: AF-5757 | Brand: Adafruit

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids...

SKU: DF-DFR0824 | Brand: DFRobot

A dual-channel RS485 expansion HAT for Raspberry Pi that provides electrically isolated RS485 communication with built-in protection against lightning, surges, and transient voltage spikes. Each channel uses an isolat...

SKU: AF-5728 | Brand: Adafruit

The Adafruit PiCowbell CAN Bus adds CAN bus connectivity to your Raspberry Pi Pico or Pico W, making it easy to interface with automotive, robotics, and industrial sensor networks. Built around the popular MCP2515 CAN...

SKU: AF-5703 | Brand: Adafruit

The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2...

SKU: PR-PIM657 | Brand: Little Bird

A beginner friendly, internet connected mood-light-in-a-bottle that's easy to program using MicroPython or CircuitPython. A cutting edge fusion of Raspberry Pi Pico W, addressable LEDs and Pirate Glass(TM) technology...

SKU: AF-5612 | Brand: Adafruit

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your...

SKU: AF-5389 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still small...

SKU: DF-DFR0828 | Brand: DFRobot

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...

SKU: DF-FIT0829 | Brand: DFRobot

The 6mm Industrial Wide Angle Lens is a 3-megapixel CS-mount lens with a 63° field of view, designed for use with the Raspberry Pi High-Quality Camera and Jetson Nano 12.3MP camera. Its wide angle and adjustable focus...

SKU: DF-DFR0913 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...

SKU: AF-5087 | Brand: Adafruit

A matching pair of 3-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5038 | Brand: Adafruit

Witty Pi 3 Mini adds a real-time clock (DS3231SN) and intelligent power management to your Raspberry Pi in a compact bonnet/pHAT form factor. It allows you to schedule startup and shutdown times, define complex ON/OFF...