Raspberry Pi

SKU: PI-COM1101 | Brand: Pimoroni

These 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.You can choose either straight or at a 90° angle.Add one to a Pi Zero for compatibility with HATs (which use a female header).Can...

SKU: AF-1648 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connect...

SKU: SF-SEN-00245 | Brand: SparkFun

The DS18B20 is a digital temperature sensor from Maxim (now Analog Devices) that communicates over a 1-Wire bus. It reports temperature in degrees Celsius with 9 to 12-bit configurable resolution. Each sensor has a un...

SKU: AF-1988 | Brand: Adafruit

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where ...

SKU: PK-PT2011A | Brand: Little Bird

Are you still bothered by the Raspberry Pi fever problem? Don’t worry, we have prepared a cooling solution for the Raspberry Pi 4B. Aluminum heat sink is adopted due to its highly cooling feature and excellent resi...

SKU: PI-PIM724 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP...

SKU: WS-25506 | Brand: Waveshare

Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM and 16MB onboard Flash memory, compatible with Raspberry Pi 40PIN GPIO header RP2040-PiZero Development Bo...

SKU: PR-PIM610 | Brand: Little Bird

A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a stylishly monochr...

SKU: WS-20290 | Brand: Waveshare

The RP2040-Plus is a Pico-compatible development board based on the Raspberry Pi RP2040 microcontroller, upgraded with 4 MB onboard flash, a USB-C connector, and a lithium battery charge/discharge header for portable ...

SKU: PH-TPH-053 | Brand: PiHut

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera. Easy to assemble, the plate attaches to your High Quality Camera on one side, and your Raspberry Pi m...

SKU: LB-24-TEMP | Brand: Little Bird

A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...

SKU: AF-4170 | Brand: Adafruit

A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...

SKU: PR-PIM300 | Brand: Little Bird

The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin hei...

SKU: AF-3708 | Brand: Adafruit

If you didn't think that the Raspberry Pi Zero W could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero WH offers all the benefits of the Pi Zero W, b...

SKU: SF-CAB-13243 | Brand: SparkFun

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals...

SKU: AF-1979 | Brand: Adafruit

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23mm tall: when placed o...

SKU: PR-PIM213 | Brand: Little Bird

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with i...

SKU: LB-LS1719 | Brand: Little Bird

A Mini HDMI to VGA adapter for connecting the Raspberry Pi Zero or Zero W to VGA monitors, projectors, and TVs. Converts the digital Mini HDMI signal to analogue VGA, supporting resolutions up to 1080p. Key Features ...

SKU: DF-SEN0638 | Brand: DFRobot

HUSKYLENS 2 is a powerful AI vision sensor with a 1.6GHz dual-core processor and 6 TOPS AI accelerator. With 20+ built-in AI models and the ability to train and deploy custom YOLO models, it brings advanced computer v...

SKU: WS-31436 | Brand: Waveshare

Unleash the true potential of your Raspberry Pi 5 with our cutting-edge PCIe to USB 3.2 Gen1 and M.2 HAT - the ultimate expansion device for tech enthusiasts and power users alike. This HAT+ Standard compliant hardwar...