SparkFun Qwiic Ecosystem

SKU: AF-6357 | Brand: Adafruit

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for fric...

SKU: AF-4503 | Brand: Adafruit

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3...

SKU: SF-GPS-19390 | Brand: SparkFun

This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...

SKU: SF-WRL-18712 | Brand: SparkFun

Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satelli...

SKU: SF-GPS-29891 | Brand: SparkFun

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level posit...

SKU: SF-GPS-29887 | Brand: SparkFun

Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidanc...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...

SKU: SF-COM-18565 | Brand: SparkFun

This compact white alphanumeric display gives you fourteen-segment characters for showing numbers, letters and symbols in your project. It uses the VK16K33 LED driver over I2C, so it is a neat fit for Qwiic-based buil...

SKU: SF-PRT-26784 | Brand: SparkFun

This compact Qwiic board lets you switch power to downstream Qwiic devices so high-current modules can be turned off when they are not needed. That can help conserve energy in battery-powered builds using GNSS and oth...

SKU: SF-GPS-26916 | Brand: SparkFun

This compact high-precision positioning board combines a Quectel LG290P GNSS RTK receiver with an Espressif ESP32-PICO-MINI-02 MCU module. It runs SparkFun’s RTK Everywhere firmware, letting it operate as a base stati...

SKU: SF-LCD-29530 | Brand: SparkFun

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...

SKU: SF-COM-30416 | Brand: SparkFun

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...

SKU: AF-5603 | Brand: Adafruit

Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver bo...

SKU: SF-DEV-20748 | Brand: SparkFun

This single-board carrier lets you connect one MicroMod Processor Board to one MicroMod Function Board using SparkFun’s M.2-based MicroMod ecosystem. Align the keyed edge connector, fasten the boards with screws, and ...

SKU: SF-COM-16917 | Brand: SparkFun

Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment disp...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-WRL-21327 | Brand: SparkFun

This board is a low-power 2.4GHz BT beacon breakout built around the InPlay IN100 NanoBeacon. It is designed for fast deployment in wireless sensor monitoring, asset tracking, retail beaconing and real-time location t...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...