SparkFun Qwiic Ecosystem
The SparkFun Qwiic connector system makes I2C wiring simple — just plug in a cable and start reading sensors. No soldering, no jumper wires, no address headaches. Browse our range of Qwiic-compatible boards, environmental sensors, gas sensors, cables, and adapters.
Ideal for rapid prototyping, STEM education, and maker projects across Australia. Qwiic's daisy-chainable design lets hobbyists and professionals build complex sensor networks in minutes. We ship from Australia with fast local delivery.
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
SKU: AF-4424 | Brand: Adafruit
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the...
Delivered by Thu 18 Jun
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
SKU: AF-5384 | Brand: Adafruit
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...
Delivered by Thu 18 Jun
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
SKU: AF-4210 | Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...
Delivered by Thu 18 Jun
Flexible Qwiic Cable - 50mm
SKU: SF-PRT-17260 | Brand: SparkFun
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon m...
Delivered by Thu 18 Jun
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
SKU: AF-4401 | Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching fe...
Delivered by Thu 18 Jun
SparkFun Qwiic MultiPort
SKU: SF-BOB-18012 | Brand: SparkFun
Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. O...
Delivered by Thu 18 Jun
Pimoroni Pico Plus 2
SKU: PI-PIM724 | Brand: Pimoroni
A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP...
Delivered by Thu 18 Jun
SparkFun Qwiic Adapter
SKU: SF-DEV-14495 | Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...
Delivered by Thu 18 Jun
Flexible Qwiic Cable - 200mm
SKU: SF-PRT-17258 | Brand: SparkFun
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...
Delivered by Thu 18 Jun
Flexible Qwiic Cable - 100mm
SKU: SF-PRT-17259 | Brand: SparkFun
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...
Delivered by Thu 18 Jun
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
SKU: SF-SEN-15335 | Brand: SparkFun
The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...
Delivered by Thu 18 Jun
SparkFun Qwiic pHAT V2.0 for Raspberry Pi
SKU: SF-DEV-15945 | Brand: SparkFun
The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic...
Delivered by Thu 18 Jun
SparkFun Qwiic SHIM for Raspberry Pi
SKU: SF-DEV-15794 | Brand: SparkFun
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering...
Delivered by Thu 18 Jun
SparkFun RedBoard Qwiic
SKU: SF-DEV-15123 | Brand: SparkFun
The SparkFun RedBoard Qwiic is an Arduino-compatible development board in the UNO R3 form factor with a built-in Qwiic connector for solderless I2C hookup. It programs over USB Micro-B using the Arduino IDE — select "...
Delivered by Thu 18 Jun
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Delivered by Thu 18 Jun
SparkFun Qwiic Pro Micro - USB-C (ATmega32U4)
SKU: SF-DEV-15795 | Brand: SparkFun
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The SparkFun Qwiic Pro Micro is a revision of the original Pro Micro a...
Delivered by Thu 18 Jun
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Thu 18 Jun
Flexible Qwiic Cable - 500mm
SKU: SF-PRT-17257 | Brand: SparkFun
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...
Delivered by Thu 18 Jun
SparkFun Qwiic Shield for Teensy - Extended
SKU: SF-DEV-17156 | Brand: SparkFun
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chai...
Delivered by Thu 18 Jun
SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic)
SKU: SF-SEN-15440 | Brand: SparkFun
The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...
Delivered by Thu 18 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
