Prototyping

SKU: AF-5490 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-5453 | Brand: Adafruit

Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow design! Both ends have strain relief and keyed connectors. Perfect ...

SKU: AF-5360 | Brand: Adafruit

A magnetic pogo pin connector set with three 0.1" (2.54mm) spaced contact pins in a right-angle configuration. The two halves snap together via embedded magnets, ensuring all three pogo pins make reliable contact. If ...

SKU: DF-FIT0852 | Brand: DFRobot

This DIN Rail RJ45 Terminal Block Adapter-Horizontal, perfect for simplifying complex wiring, consists of an RJ45 Ethernet jack and an eight-port terminal. You can connect an RJ45 Ethernet to PCB which can be DIN rai...

SKU: DF-DFR0913 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...

SKU: AF-4423 | Brand: Adafruit

Totaling 560 pieces, this JST-XH Connector Kit is a must-have for your workstation. You'll have enough sockets and headers to fuel your maker tendencies for days on end!These connectors are really ...

SKU: AF-4938 | Brand: Adafruit

A 7-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping ind...

SKU: AF-4936 | Brand: Adafruit

A 4-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without using loos...

SKU: AF-4437 | Brand: Adafruit

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which ca...

SKU: AF-5089 | Brand: Adafruit

A matching pair of 5-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5131 | Brand: Adafruit

A comprehensive 800-piece wire ferrule kit for creating clean, reliable connections with stranded wire. Wire ferrules are tinned copper sleeves that, once crimped onto stranded wire, hold all the individual strands ne...

SKU: AF-4930 | Brand: Adafruit

This 1.25 mm pitch 10-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal w...

SKU: AF-4718 | Brand: Adafruit

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...

SKU: AF-4719 | Brand: Adafruit

The Adafruit SPI Non-Volatile FRAM Breakout provides 4 Mbit (512 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no p...

SKU: EC-ACA09802A | Brand: Elecrow

This kit has more than 7 components for the beginners. You may learn about Arduino through using these basic projects by using your own hands. Try any circuit what you want to the Arduino and accomplish your creation....

SKU: AF-4409 | Brand: Adafruit

The Adafruit STEMMA Non-Latching Mini Relay lets you switch lamps, fans, solenoids, and other small appliances (up to 250 VAC/DC) using any 3V or 5V microcontroller — no soldering, flyback diodes, or level shifting re...

SKU: AF-4208 | Brand: Adafruit

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to yo...

SKU: AF-4202 | Brand: Adafruit

Need some miniature indicators? We are big fans of these diffused LEDs. They are fairly bright, so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your...

SKU: DF-FIT0576 | Brand: DFRobot

This is a soft thin protoboard with hole diameter of 1mm, hole spacing of 2.54mm. It can be soldered DIP and SMD components, and the thickness is only 0.4mm. The proto board can be appropriate bending in any directio...

SKU: DF-FIT0585 | Brand: DFRobot

  INTRODUCTION   This product is high temperature resistant silicone rubber copper wire with 18AWG and 0.75mm2. It is made of fine tin-plated copper material and not easily oxidized. It adopts th...