Prototyping

SKU: LB-PT91049-3PIN | Brand: Little Bird

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with three 0.1" spaced ...

SKU: LB-2x40-BLUE | Brand: Little Bird

This double-row, 80-pin (2×40) straight male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any dual-row length you need. The...

SKU: AF-5938 | Brand: Adafruit

A breakaway strip of 36 press-fit male pin headers at standard 2.54mm (0.1") pitch. These headers can be attached to PCBs without soldering — press them firmly into place using pliers for a friction-fit connection tha...

SKU: LB-00053 | Brand: Little Bird

A simple breakout board for XBee modules that brings all 20 pins out to standard 0.1″ (2.54 mm) dual-row headers. The 0.5″ spacing between header rows makes it breadboard DIP-friendly for easy prototyping. Key Featur...

SKU: LB-LS5179-5 | Brand: Little Bird

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless ele...

SKU: LB-LS7241 | Brand: Little Bird

A flexible double-sided prototyping board measuring 6×8cm. The bendable PCB material allows you to fit circuits into curved enclosures or unconventional spaces where rigid boards won't work. Key Features Flexible M...

SKU: SF-BOB-28467 | Brand: SparkFun

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 ...

SKU: LB-5-EDGE | Brand: Little Bird

These 2.54mm pitch edge card connectors are designed for interfacing with compatible PCBs or circuit boards, allowing easy data transmission. They are commonly used in computers as expansion slots for peripheral cards...

SKU: AF-6020 | Brand: Adafruit

DescriptionElevate your Bus Pirate 5 experience with this premium accessory. This keyed and locking probe cable, crafted from soft and flexible silicone-coated wire, connects seamlessly to the Bus Pirate's 10-pin mai...

SKU: AF-6001 | Brand: Adafruit

The Adafruit Reversible USB Type A Plug Connector Breakout breaks out a reversible USB Type A plug to breadboard-friendly pins. The connector uses a thin centre contact so it can be plugged in either way — no more gue...

SKU: SF-DEV-27876 | Brand: SparkFun

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-s...

SKU: SF-DEV-27877 | Brand: SparkFun

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when wor...

SKU: SF-BOB-29197 | Brand: SparkFun

This compact breakout makes it straightforward to connect 3.3V microcontroller projects to legacy RS232 serial equipment such as older computers, industrial machines, GPS modules and other devices using a DE9, also kn...

SKU: SF-BOB-17110 | Brand: SparkFun

USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54...

SKU: AF-5779 | Brand: Adafruit

This swirly aluminium mounting grid gives small maker boards a sturdy mechanical base when you are building plug-and-play projects with STEMMA QT boards, sensors, Feathers and other 0.1 inch-spaced PCBs.It is made usi...

SKU: SF-PRT-21297 | Brand: SparkFun

This compact regulator board makes it easy to power breadboard projects from a 6-12V supply. It provides a selectable regulated output of either 5V or 3.3V, making it handy for quick prototyping with common microcontr...

SKU: DF-FIT0916-MM | Brand: DFRobot

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin ta...

SKU: SF-COM-21409 | Brand: SparkFun

This female header provides 12 positions on a standard 0.1 inch pitch, making it suitable for compact board-to-board connections and prototyping layouts.It is designed for surface-mount applications where through-hole...

SKU: SF-KIT-15716 | Brand: SparkFun

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your ...

SKU: SF-PRT-28008 | Brand: SparkFun

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up wi...