Prototyping

SKU: SF-CAB-10646 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. len...

SKU: SF-COM-12645 | Brand: SparkFun

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 600-610nm Orange 1.8-2.2VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 10...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: AF-3814 | Brand: Adafruit

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST...

SKU: TB-ZT2298 | Brand: Little Bird

The 2N2222A is a widely used general-purpose NPN bipolar junction transistor (BJT) in a TO-92 package. With a maximum collector current of 800 mA and a collector-emitter voltage of 75 V, it's suitable for switching an...

SKU: LB-LR0249 | Brand: Little Bird

Note: These breadboards have a badly laid out silkscreen. They work perfectly well as breadboards, but do not rely on the printed reference markers. An 830-point solderless breadboard (MB-102) at a discounted price...

SKU: SF-COM-10213 | Brand: SparkFun

If you’ve ever wondered how to control the headlight of a car from a microcontroller, a MOSFET is what you need. This is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) tha...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: LB-LS1372 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: LB-JST-10 | Brand: Little Bird

A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and ...

SKU: LB-50K | Brand: Little Bird

This 50KΩ single-turn potentiometer provides smooth linear (Type B) resistance adjustment, making it ideal for volume controls, brightness adjustments, and analogue input on Arduino and other microcontroller projects....

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: LB-LR0549 | Brand: Little Bird

Description:620pcs Wire Jumper Pin Header Connector Housing Kit For Dupont and Crimp PinsSpecification: Brand:Excellway Model:TC10 Colors: Black,Silver Box Size: about 17.4x9.9x2.3cm(6.85x3.89x0...

SKU: AF-1536 | Brand: Adafruit

A breadboard-friendly active buzzer module that produces a loud 2 kHz tone when you apply 3–5V. Unlike a passive piezo element, this buzzer has built-in driver circuitry — no oscillating signal needed, just apply powe...

SKU: SF-COM-11508 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-fri...

SKU: LB-LS3450 | Brand: Little Bird

A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances,...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...