Prototyping

SKU: SF-CAB-18080 | Brand: SparkFun

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a s...

SKU: SF-COM-18076 | Brand: SparkFun

The GD25Q40C is a 4 Mbit (512 KB) serial flash memory chip supporting standard, dual, and quad SPI interfaces. With clock speeds up to 120 MHz and quad I/O transfer rates reaching 480 Mbits/s, it provides fast non-vol...

SKU: AF-4907 | Brand: Adafruit

A pack of 10 USB-C jack connectors designed for power-only applications. These sturdy metal connectors feature four through-hole mounting tabs that make them extremely difficult to rip off a PCB. They also work in SMT...

SKU: AF-4955 | Brand: Adafruit

Kailh White clicky mechanical key switches with Cherry MX compatibility. These switches deliver a tactile bump and audible click on each keystroke, providing satisfying feedback for typing and custom keyboard builds. ...

SKU: SF-PRT-16581 | Brand: SparkFun

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36...

SKU: SF-COM-16305 | Brand: SparkFun

Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle o...

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: EF-EF04017 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...

SKU: AF-1230 | Brand: Adafruit

Beguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? This set of breakout PCBs will make your life much much easier and get...

SKU: AF-1505 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in black. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. ...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...

SKU: AF-2104 | Brand: Adafruit

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles...

SKU: DF-FIT0108 | Brand: DFRobot

A solder-tail DB9 male connector for serial communication interfaces including RS-232, RS-422, and RS-485. This is one of the most widely used connectors for serial data links in industrial, embedded, and legacy compu...

SKU: DF-FIT0148 | Brand: DFRobot

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crim...

SKU: SF-PRT-14322 | Brand: SparkFun

These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header...

SKU: DF-FIT0008-G | Brand: DFRobot

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colors. SP...

SKU: SF-COM-09349 | Brand: SparkFun

This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (s...

SKU: SF-PRT-09194 | Brand: SparkFun

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. T...

SKU: DF-FIT0206 | Brand: DFRobot

This is a 1-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pi...