Prototyping

SKU: AF-5619 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not ...

SKU: AF-5497 | Brand: Adafruit

We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector exten...

SKU: AF-5532 | Brand: Adafruit

Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer (or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plast...

SKU: AF-5357 | Brand: Adafruit

This double-row 2×17 (34-pin) IDC box header with 2.54 mm (0.1″) pitch is commonly used for floppy disk drive interfaces and other legacy 34-pin IDC ribbon cable connections. The keyed box header ensures correct cable...

SKU: LB-LS0633 | Brand: Little Bird

A pack of 50 through-hole photoresistors (light-dependent resistors / LDRs) with a 5 mm diameter sensing element. These components change their resistance based on the amount of light hitting the sensor — resistance d...

SKU: SF-PRT-17252 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: AF-4405 | Brand: Adafruit

This anti-static ESD rework mat provides a safe working surface for electronic repair and assembly, especially when handling ESD-sensitive components. The high-resistance coating (tens of megaohms) dissipates static c...

SKU: AF-4354 | Brand: Adafruit

The Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit combines a full-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you...

SKU: SF-PRT-15362 | Brand: SparkFun

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the...

SKU: AF-3889 | Brand: Adafruit

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicon...

SKU: AF-3164 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: LB-LR0093 | Brand: Little Bird

Description:The ProtoShield is prototype expansion board with 2 LEDs and 2 button, which can be used directly and more convenience. All the pins and power have been lead out. It is very suitable for building prototype...

SKU: AF-3646 | Brand: Adafruit

Precision-machined Swiss-pin female socket headers for a tight, reliable fit. Unlike standard stamped-metal headers, Swiss-pin sockets use machined round contacts that grip the matching Swiss-pin male plugs securely —...

SKU: AF-1445 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. K...

SKU: AF-1518 | Brand: Adafruit

The Adafruit Flex Perma-Proto is a half-sized breadboard-layout prototyping board made from ultra-thin polyamide film. It bends, twists, and can even be cut to shape with scissors — perfect for wearables, curved enclo...

SKU: AF-1540 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-2003 | Brand: Adafruit

Super-flexible, silicone-sheathed stranded-core wire in black. The silicone insulation is incredibly soft and supple, making this wire ideal for wearable electronics, robotics, and any project where the wiring needs t...

SKU: AF-1833 | Brand: Adafruit

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or pr...

SKU: AF-1872 | Brand: Adafruit

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electron...