Prototyping & Wiring
Everything you need to wire up, connect, and house your electronics projects — all in one place. From breadboards and jumper wires to breakout boards, crimp connectors, headers, and project enclosures, this collection covers the essentials for hobbyists, students, and professionals alike.
Whether you're prototyping a new circuit, organising your bench, or building a finished STEM project, you'll find the right cables, connectors, and storage solutions here. Shipped Australia-wide from our Sydney warehouse.
Trace Unit (For Lidar Bot/Bala)
SKU: M5-A048 | Brand: Little Bird
Description TRACE is mainly consist of 4 sets of IR, 1x infrared emitting and 1x infrared receiver for each set. The infrared LEDs should be placed towards and close to the ground where having black tracing li...
Out of stock
GROVE Cable 100cm-1pcs
SKU: M5-A034-D | Brand: Little Bird
Description GROVE Cable would be a necessary tool used on M5Stack development, since all PORTs on M5Core are GROVE stadard. This Grove cable, compatible with the GROVE port on M5Core,simply have 4 lines, two f...
Out of stock
RBG LED is a extendable strip light with RGB LED 200cm
SKU: M5-A035-E | Brand: Little Bird
A 200 cm extendable RGB LED strip using digitally addressable WS2811 NeoPixel LEDs with a Grove connector. Each LED can display its own colour and brightness independently, and multiple strips can be daisy-chained tog...
Out of stock
LEGO Cable 20cm
SKU: M5-A030-B | Brand: Little Bird
Description LEGO Cable is used for LEGO motor which is compatible with BALA and M5Module LEGO+. We have prepared different length to fit your needs on different appliactions. Product Features 3 specifications...
Out of stock
M5StickC ADC HAT ADS1100
SKU: M5-U069 | Brand: Little Bird
Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully di...
Out of stock
LEGO Cable 30cm
SKU: M5-A030-C | Brand: Little Bird
Description LEGO Cable is used for LEGO motor which is compatible with BALA and M5Module LEGO+. We have prepared different length to fit your needs on different appliactions. Product Features 3 specifications...
Out of stock
M5StickC DAC HAT MCP4725
SKU: M5-U068 | Brand: Little Bird
The M5StickC DAC HAT is a plug-in module that adds a 12-bit digital-to-analogue converter (DAC) to your M5StickC. Built around the MCP4725 chip, it provides a single-channel analogue voltage output from 0 to 3.3 V, co...
Out of stock
Grove-T Connector (5pcs)
SKU: M5-U039-B | Brand: Little Bird
Description Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just...
Out of stock
2.54mm Mini Proto Unit 70 Holes
SKU: M5-U022 | Brand: Little Bird
The M5Stack Proto Unit is a compact universal prototyping board designed for the M5Stack ecosystem. It connects to an M5Stack Core via the Grove port, giving you the freedom to build custom circuits and add-ons for yo...
Out of stock
IO Unit Kit ( I/O Proto Relay 3.96 RS485 DAC ADC)
SKU: M5-U051 | Brand: Little Bird
Including 7 Different Units: Ext.IO, Proto, Relay, 3.96, RS485, DAC, ADC
Out of stock
PLC Proto Industrial Board Module
SKU: M5-K011-B | Brand: Little Bird
The PLC Proto Industrial Board is a base module designed for industrial applications in the M5Stack ecosystem. It accepts 9–24 V DC power input and includes a protoboard area for custom circuit layouts, plus an RS485 ...
Out of stock
Vibration Motor Unit (N20)
SKU: M5-U059 | Brand: Little Bird
DescriptionVibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen be...
Out of stock
Stick C including 80mAh-Battery + Watch Accessories + USB Cable
SKU: M5-K016-D | Brand: Little Bird
Noted: Stick C ETD on Oct.10, thanks for the understanding. M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This ti...
Out of stock
COMMU Module Extend RS485/TTL CAN/I2C Port
SKU: M5-M011 | Brand: Little Bird
Description COMMU is a Muti-Communication-Interface-Converter. Integrated with 2IIC, 1TTL, 1CAN, 1RS485. Apparently COMMU has packed with most of series communications. Default connection: TTL - UART0, RS485 -...
Out of stock
Acrylic Piano Board with RGB LED
SKU: M5-A047 | Brand: Little Bird
The PIANO is an acrylic piano keyboard base for M5Stack Core modules, designed for music and sound projects. It features two TS20 capacitive touch sensor ICs that communicate with the M5 Core via I2C, along with RGB L...
Out of stock
SparkFun Qwiic Motor Driver
SKU: SF-ROB-15451 | Brand: SparkFun
The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them, adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-ch...
Out of stock
SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 MAX32664 (Qwiic)
SKU: SF-SEN-15219 | Brand: SparkFun
The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor, utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. W...
Out of stock
Speaker Kit for Raspberry Pi
SKU: MM-SKU00077 | Brand: Monk Makes
The Speaker Kit for Raspberry Pi is a great way of attaching a small amplified speaker to a Raspberry Pi.Raspberry Pi NOT includedThe kit includes: MonkMakes Amplified Speaker Set of 10 female to female header wi...
Out of stock
Robo:Bit Mk3 Buggy for the BBC Micro:Bit (RoboBit 3 for Microbit)
SKU: TR-ROBOBIT-MK3 | Brand: 4tronix
Mk3 is very similar to Mk2 but with all the optional extras integrated (except Talon)The Robobit Makecode package supports all versions of Robobit Mk3This little buggy can be assembled very quickly using only a screwd...
Out of stock
SparkFun Ambient Light Sensor - VEML6030 (Qwiic)
SKU: SF-SEN-15436 | Brand: SparkFun
The SparkFun VEML6030 Ambient Light Sensor is a high-accuracy, 16-bit light sensor that measures ambient light in lux with a spectral response similar to the human eye. It connects via the Qwiic I2C system for solderl...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
