Prototyping & Wiring

SKU: SF-COM-28392 | Brand: SparkFun

This RGB LED gives you red, green and blue light in a single component, making it a handy part for colour-mixing experiments, indicators and tutorial projects.220 ohm resistors are included, so you have the basic curr...

SKU: SF-COM-29391 | Brand: SparkFun

This black 25mm potentiometer knob is a simple, sturdy control knob for adding a clean finish to panel-mounted pots and other compatible controls.It slides onto the potentiometer shaft and uses a key lock to help it h...

SKU: SF-COM-29764 | Brand: SparkFun

Capacitors are one of the staple components you will reach for again and again when building electronics projects. They store and release electrical energy, making them useful for filtering noise in power supplies, cr...

SKU: SF-COM-30154 | Brand: SparkFun

This is a basic 1 MOhms through-hole resistor with ±5% tolerance and a 1/6W power rating. It is a simple passive component suited to prototyping, repairs and general circuit building.The PTH package is commonly used w...

SKU: SF-PRT-29360 | Brand: SparkFun

This hookup cable provides a simple way to connect to a RockBLOCK 9704 module. It has a 2x8 C-Grid III female connector on one end and unterminated bare wires on the other.The 300mm length is suited to making your own...

SKU: SF-KIT-15716 | Brand: SparkFun

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your ...

SKU: SF-PRT-26991 | Brand: SparkFun

This small machine screw is a handy fastener for electronics projects, enclosures, brackets and other light-duty assemblies that use 4-40 hardware.It has a Phillips drive and pan head, with a zinc-finished steel const...

SKU: SF-PRT-28764 | Brand: SparkFun

This M2.5-0.45 machine screw is a small Phillips-head fastener suited to electronics assemblies, enclosures and board mounting jobs.The 8.0mm long thread is handy for Raspberry Pi pHAT standoffs and other compact hard...

SKU: SF-PRT-26986 | Brand: SparkFun

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and ...

SKU: SF-PRT-26988 | Brand: SparkFun

This is a short piece of spring steel music wire that can be bent to the shape you need for small mechanisms, linkages, prototypes or craft builds.Each unit is supplied as an individual 6 inch length with a fine 0.025...

SKU: SF-PRT-28008 | Brand: SparkFun

This header set gives you the female headers needed to populate the prototyping area on an Alchitry Br Wide V2 Board. It includes four 2x14 headers and two 2x6 headers, all with 0.1"-spaced pins.The headers line up wi...

SKU: SF-PRT-28866 | Brand: SparkFun

This mounting arm provides a stable platform for securing an anemometer and wind vane as part of a weather station setup. It is the same style of arm included with the SparkFun Weather Meter Kit.Designed for straightf...

SKU: SF-WRL-23187 | Brand: SparkFun

This PCB edge-mount SMA RF connector is made for adding an antenna connection directly to your circuit board. It is a handy choice for prototyping wireless designs that need a standard SMA antenna interface.The connec...

SKU: SF-DD-18616 | Brand: SparkFun

This handy adapter cable connects a five-pin GHR-05V type locking JST connector to breadboard-friendly male pins, making it easier to prototype with small modules that use compact locking connectors.The 1.25mm pitch G...

SKU: SF-DD-18638 | Brand: SparkFun

This cable adapts a 4-pin JST-ZHR connector to breadboard-compatible male pins, making it easier to prototype with devices that use the common friction-fit ZHR-style JST connection.It is a handy option for connecting ...

SKU: SF-PRT-08230 | Brand: SparkFun

This male polarised header is made for perfboard and PCB projects where you want a connector that can only be plugged in the correct way around.It is suitable for power connections, sensors, and general-purpose wiring...

SKU: SF-PRT-18986 | Brand: SparkFun

This is a simple 3-pin male right-angle header for through-hole PCB mounting. It is handy when you need pins to exit sideways from a board instead of straight up.The header uses the standard 0.1in pin spacing, making ...

SKU: SF-PRT-18987 | Brand: SparkFun

This is a simple 12-pin male straight header for plated through-hole (PTH) connections. It is handy for adding pins to PCBs, breakout boards and other projects that use the standard 0.1 inch header spacing.If you do n...

SKU: SF-PRT-22893 | Brand: SparkFun

This compact female straight header is a simple way to add a 2-pin socket connection to your PCB or prototyping project. It uses standard 0.1in spacing, making it suitable for many common maker and electronics builds....

SKU: SF-PRT-23022 | Brand: SparkFun

This is a simple 2x6 female header for making reliable board-to-board or cable-to-board connections in your electronics projects.The header is a straight PTH style part, suitable for through-hole soldering onto compat...