Prototyping & Wiring

SKU: SF-CAB-29325 | Brand: SparkFun

This short mini coax lead links U.FL-equipped RF submodules and other RF devices to carrier boards. At 50mm long, it is designed to be long enough to make the connection while staying tidy inside compact builds.The 50...

SKU: SF-CAB-17854 | Brand: SparkFun

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are s...

SKU: SF-CAB-27480 | Brand: SparkFun

This 1 metre RF coaxial cable adapts an SMA male connection to a BNC male connection, making it handy for test gear, antennas, RF modules and lab setups that use mixed connector types.It uses RG316-style coax shieldin...

SKU: SF-CAB-09215 | Brand: SparkFun

This handy AVR programming cable combines the common 10-pin and 6-pin ISP programming interfaces in one lead, making it useful when your programmer and target board use different AVR ISP header formats.The cable is ab...

SKU: SF-CAB-19289 | Brand: SparkFun

This simple adapter cable makes it easy to connect between 3-pin JST and 3-pin Molex connectors in your electronics project.It has a 3-pin Molex connector on one end and a 3-pin JST connector on the other, both with 0...

SKU: SF-CAB-29458 | Brand: SparkFun

This IDC ribbon cable is a handy interconnect for compact electronics projects that use a 2mm pitch, 2x3-pin layout. At 120mm long, it is suited to short board-to-board runs inside enclosures or between nearby modules...

SKU: SF-CAB-28303 | Brand: SparkFun

This flat flexible cable is a compact 22-pin FPC lead for joining compatible boards and peripherals where space is tight. It has a 0.5mm pitch and a 100mm length, making it suitable for short internal connections.The ...

SKU: SF-COM-21409 | Brand: SparkFun

This female header provides 12 positions on a standard 0.1 inch pitch, making it suitable for compact board-to-board connections and prototyping layouts.It is designed for surface-mount applications where through-hole...

SKU: SF-COM-28392 | Brand: SparkFun

This RGB LED gives you red, green and blue light in a single component, making it a handy part for colour-mixing experiments, indicators and tutorial projects.220 ohm resistors are included, so you have the basic curr...

SKU: SF-COM-29764 | Brand: SparkFun

Capacitors are one of the staple components you will reach for again and again when building electronics projects. They store and release electrical energy, making them useful for filtering noise in power supplies, cr...

SKU: SF-COM-30154 | Brand: SparkFun

This is a basic 1 MOhms through-hole resistor with ±5% tolerance and a 1/6W power rating. It is a simple passive component suited to prototyping, repairs and general circuit building.The PTH package is commonly used w...

SKU: SF-PRT-29360 | Brand: SparkFun

This hookup cable provides a simple way to connect to a RockBLOCK 9704 module. It has a 2x8 C-Grid III female connector on one end and unterminated bare wires on the other.The 300mm length is suited to making your own...

SKU: SF-KIT-15716 | Brand: SparkFun

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your ...

SKU: SF-PRT-26991 | Brand: SparkFun

This small machine screw is a handy fastener for electronics projects, enclosures, brackets and other light-duty assemblies that use 4-40 hardware.It has a Phillips drive and pan head, with a zinc-finished steel const...

SKU: SF-PRT-28764 | Brand: SparkFun

This M2.5-0.45 machine screw is a small Phillips-head fastener suited to electronics assemblies, enclosures and board mounting jobs.The 8.0mm long thread is handy for Raspberry Pi pHAT standoffs and other compact hard...

SKU: SF-PRT-26986 | Brand: SparkFun

This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and ...

SKU: SF-PRT-26988 | Brand: SparkFun

This is a short piece of spring steel music wire that can be bent to the shape you need for small mechanisms, linkages, prototypes or craft builds.Each unit is supplied as an individual 6 inch length with a fine 0.025...

SKU: SF-PRT-28866 | Brand: SparkFun

This mounting arm provides a stable platform for securing an anemometer and wind vane as part of a weather station setup. It is the same style of arm included with the SparkFun Weather Meter Kit.Designed for straightf...

SKU: SF-WRL-23187 | Brand: SparkFun

This PCB edge-mount SMA RF connector is made for adding an antenna connection directly to your circuit board. It is a handy choice for prototyping wireless designs that need a standard SMA antenna interface.The connec...

SKU: SF-DD-18616 | Brand: SparkFun

This handy adapter cable connects a five-pin GHR-05V type locking JST connector to breadboard-friendly male pins, making it easier to prototype with small modules that use compact locking connectors.The 1.25mm pitch G...