Prototyping & Wiring

SKU: DF-FIT0752 | Brand: DFRobot

This fine-diameter wiring is made for precision soldering, compact circuit assemblies and high-temperature electronics work. With a slim 0.4mm outer diameter, it is well suited to routing through dense PCB layouts, fl...

SKU: DF-FIT0753 | Brand: DFRobot

This micro-diameter red hookup wire is made for compact electronics assembly, PCB rework and other wiring jobs where ordinary hookup wire is too bulky. Its 0.4mm outer diameter makes it easy to route through tight spa...

SKU: DF-FIT0754 | Brand: DFRobot

This fine blue welding wire is made for detailed electronics work where a slim, heat-resistant conductor is useful. It uses seven 0.08mm silver-plated copper wires inside a PFA insulation cover, giving it high tempera...

SKU: DF-FIT0755 | Brand: DFRobot

This ultra-fine insulated wire is made for precision electronics work where space is tight and soldering needs to be neat. It uses seven strands of 0.08mm silver-plated copper conductor, giving it flexibility while ma...

SKU: DF-FIT0682 | Brand: DFRobot

This 5cm 18-pin FPC flat flex ribbon cable is made for connecting compatible controller boards to GDI-enabled display modules. Its short length is suited to compact builds where you want a neat internal display connec...

SKU: DF-FIT0692 | Brand: DFRobot

This 30 cm flat flex ribbon cable is made for connecting compatible GDI display modules to controller boards. It uses an 18-pin reverse FPC layout with a 0.5 mm pitch, helping keep display wiring neat in compact elect...

SKU: DF-FIT0691 | Brand: DFRobot

This 20cm 18-pin FPC flat flex ribbon cable is made for connecting compatible display modules and controller boards that use the GDI interface. Its reverse 18-pin layout and 0.5mm pitch suit compact display projects w...

SKU: DF-FIT0581 | Brand: DFRobot

This heavy-duty silicone-insulated wire pair is designed for high-current power transmission in electronics, robotics and model systems. Each conductor uses fine tin-plated copper strands to help resist oxidation whil...

SKU: DF-FIT0582 | Brand: DFRobot

This heavy-duty silicone-insulated wire pair is made for high-current power wiring in robotics, models, motors and other demanding maker projects. It uses fine tin-plated copper strands for stable conductivity and oxi...

SKU: DF-FIT0583 | Brand: DFRobot

This is a pair of high-temperature resistant silicone rubber copper wires in 14AWG / 2.5mm² size, supplied as one red 1 metre length and one black 1 metre length. The conductor is made from fine tin-plated copper to h...

SKU: DF-FIT0584 | Brand: DFRobot

This flexible silicone-insulated wire pair is made for high-current power wiring in demanding electronics, robotics and motion-control projects. It uses fine tin-plated copper strands for good conductivity and oxidati...

SKU: DF-FIT1025 | Brand: DFRobot

Built specifically for the RDK X5 AI Board, this full-metal enclosure provides a tough protective shell while also acting as a passive heatsink. It helps protect the board from impacts, dust and accidental contact, wh...

SKU: DF-FIT0902 | Brand: DFRobot

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, pe...

SKU: DF-FIT0924 | Brand: DFRobot

This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards i...

SKU: DF-FIT0894 | Brand: DFRobot

This push-in wire connector turns a single input connection into six output connections, making it a handy power distribution tool for low-voltage DC wiring.The push-in wiring method makes connections quick and conven...

SKU: DF-FIT0440 | Brand: DFRobot

This Kingston SDHC memory card is supplied for the OverLord 3D printer and comes pre-loaded with useful files to help you get started. The card includes the Overlord user manual, Cura printing software and test print ...

SKU: DF-FIT0990 | Brand: DFRobot

This high-performance USB4 USB-C cable is made for modern devices that need both fast data and serious power through a single connection. It supports up to 40Gbps data transfer, PD3.1 charging up to 240W, and Thunderb...

SKU: DF-FIT0728 | Brand: DFRobot

This PG7L waterproof cable gland provides a neat sealing solution for routing cables into outdoor or moisture-sensitive electronics enclosures. It helps close off the entry point created when drilling into project box...

SKU: SF-PRT-30977 | Brand: SparkFun

This cover is a dedicated mounting accessory for compatible Akasa fanless Raspberry Pi enclosures. It replaces or supplements the standard enclosure panel so the case can be attached to the back of a display or anothe...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...