Prototyping & Wiring

SKU: SF-PRT-10453 | Brand: SparkFun

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: AF-590 | Brand: Adafruit

A value pack of three Adafruit Perma-Proto Full-Sized Breadboard PCBs. Each board mirrors the layout of a standard full-size solderless breadboard with 60 rows of 5-hole connected pads, four power bus rails, and clear...

SKU: SF-WRL-12823 | Brand: SparkFun

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile r...

SKU: AF-591 | Brand: Adafruit

The Adafruit Perma-Proto Super Pack includes 9 high-quality prototyping PCBs — three of each size — so you always have the right board for whatever you're working on. Each board features through-plated, gold-finished ...

SKU: AF-1873 | Brand: Adafruit

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins t...

SKU: SF-SEN-12784 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 use...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: SF-SEN-12785 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180...

SKU: DF-DFR0407 | Brand: DFRobot

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagneti...

SKU: SF-TOL-12783 | Brand: SparkFun

A 1ft (30cm) flexible coolant pipe with articulating segments that hold their position when bent. Originally designed for directing coolant or washing fluid on machine tools, these pipes are also popular with makers a...

SKU: SF-PRT-10370 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: AF-613 | Brand: Adafruit

Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC...

SKU: SF-PRT-10364 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10369 | Brand: SparkFun

A 6" (15 cm) four-wire jumper cable with 4-pin JST RE connectors on both ends, designed for board-to-board connections on standard 0.1" (2.54 mm) pitch headers. Specifications Wires – 4 Connector – 4-pin JST RE on...

SKU: SF-PRT-10368 | Brand: SparkFun

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications ...

SKU: AF-1829 | Brand: Adafruit

A DIY Micro USB B female connector in a panel-mount-style shell. The black plastic shell can be glued into your project enclosure, with the Micro B connector press-fitted into place. The five pins are spaced for easy ...

SKU: SF-PRT-10367 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: DF-FIT0455-G | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: AF-1814 | Brand: Adafruit

A 10-segment LED bar graph display in pure green — a vivid, true green that's much closer to blue than typical "yellow green" LEDs. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while ...

SKU: SF-PRT-10365 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway hea...