Prototyping & Wiring

SKU: SF-WRL-13225 | Brand: SparkFun

The SparkFun XBee Explorer Serial is an RS232 serial base unit for configuring and communicating with XBee modules. Compatible with all XBee modules including Series 1, Series 2.5, standard, and Pro versions. Simply p...

SKU: DF-FIT0392 | Brand: DFRobot

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explo...

SKU: SF-BOB-11083 | Brand: SparkFun

The SparkFun FM Tuner Basic Breakout is built around the Silicon Labs Si4703 FM tuner IC, providing a full-featured FM radio receiver on a compact breakout board. Beyond standard FM reception, the Si4703 supports Radi...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: AF-3191 | Brand: Adafruit

The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 1...

SKU: AF-364 | Brand: Adafruit

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-399 | Brand: Adafruit

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character dis...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: SF-PRT-13113 | Brand: SparkFun

This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in...

SKU: TB-RC5324 | Brand: Little Bird

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circuits. They're commonly used for decoupling, bypassing, and high-frequenc...

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...

SKU: SF-TOL-10865 | Brand: SparkFun

There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: DF-FIT0414 | Brand: DFRobot

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable. WRTnode(A Mini Op...

SKU: DF-FIT0416 | Brand: DFRobot

Introduction This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an external crystal oscillator, has high stability and str...

SKU: DF-FIT0417 | Brand: DFRobot

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The gr...

SKU: SF-COM-10791 | Brand: SparkFun

A right-angle tactile switch in a sturdy through-hole package with a satisfying click. Mount it on the edge of your PCB for easy side-access button input. Specifications Orientation – Right angle (horizontal actuat...

SKU: PL-1960 | Brand: Pololu

Steel zinc-plated pan-head Phillips machine screws, #4-40 thread, ¼" (6.35mm) long. Sold in a pack of 25. Ideal for securing PCBs, standoffs, and enclosures in electronics projects. Specifications Thread: #4-40 Le...

SKU: SF-TOL-10603 | Brand: SparkFun

You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we’re always up to date on the latest in ‘tweezing’ technology, we’re always buying and te...