Prototyping & Wiring
Everything you need to wire up, connect, and house your electronics projects — all in one place. From breadboards and jumper wires to breakout boards, crimp connectors, headers, and project enclosures, this collection covers the essentials for hobbyists, students, and professionals alike.
Whether you're prototyping a new circuit, organising your bench, or building a finished STEM project, you'll find the right cables, connectors, and storage solutions here. Shipped Australia-wide from our Sydney warehouse.
Ambient Light Sensor - TEMT6000x01
SKU: SF-COM-08348 | Brand: SparkFun
The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...
Delivered by Wed 10 Jun
Wifi Bee-RN-XV
SKU: DF-TEL0067 | Brand: DFRobot
The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to r...
Delivered by Wed 10 Jun
Polarized Connectors - Header (3-Pin)
SKU: SF-PRT-08232 | Brand: SparkFun
A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Spec...
Delivered by Wed 10 Jun
Polarized Connectors - Header (4-Pin)
SKU: SF-PRT-08231 | Brand: SparkFun
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. T...
Delivered by Wed 10 Jun
Polarized Connectors - Crimp Pins
SKU: SF-PRT-08100 | Brand: SparkFun
Individual crimp pins for use with polarized connector housings. These pins prevent incorrect or reversed connections, making them ideal for power, sensor, and general-purpose wiring on perfboard and PCB projects. At...
Delivered by Wed 10 Jun
Polarized Connectors - Housing (4-Pin)
SKU: SF-PRT-08097 | Brand: SparkFun
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. T...
Delivered by Wed 10 Jun
Stepper Motor: Bipolar, 200 Steps/Rev, 42x38mm, 2.8V, 1.7 A/Phase
SKU: PL-2267 | Brand: Pololu
A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to t...
Delivered by Wed 10 Jun
Spectacle Director Board
SKU: SF-DEV-13912 | Brand: SparkFun
The Spectacle Director Board controls all the actions in a Spectacle project. Though the Director Board doesn’t do too much on its own, it is what communicates directly with SparkFun’s Spectacle programmer and is the ...
Delivered by Wed 10 Jun
MinIMU-9 v2 Gyro, Accelerometer, and Compass
SKU: PL-1268 | Brand: Pololu
The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...
Delivered by Wed 10 Jun
MinIMU-9 Gyro, Accelerometer, and Compass
SKU: PL-1265 | Brand: Pololu
This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...
Delivered by Wed 10 Jun
Ceramic Resonator 8MHz
SKU: SF-COM-00542 | Brand: SparkFun
Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or better from -20C-+80C. These resonators have built-in load capacitors so n...
Delivered by Wed 10 Jun
Crystal 4MHz
SKU: SF-COM-00539 | Brand: SparkFun
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.
Delivered by Wed 10 Jun
Crystal 32kHz
SKU: SF-COM-00540 | Brand: SparkFun
Standard ‘Watch’ or Real-Time-Clock crystal. 32.768kHz means it is precisely half of a 16-bit counter. Start counting at 0x8000 (or 32768). When the counter rolls over from 65535 to 0, then you know that exactly one s...
Delivered by Wed 10 Jun
Crystal 10MHz
SKU: SF-COM-00535 | Brand: SparkFun
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.
Delivered by Wed 10 Jun
SparkFun Infrared Temperature Breakout - TMP006
SKU: SF-SEN-11859 | Brand: SparkFun
This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...
Delivered by Wed 10 Jun
RGB LED Satellite Module 004 (Circle)
SKU: PL-1245 | Brand: Pololu
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...
Delivered by Wed 10 Jun
6x1 F-F 12 Cable for ShiftBrites and ShiftBars
SKU: PL-1239 | Brand: Pololu
A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...
Delivered by Wed 10 Jun
USB-to-Serial Bridge - µUSB-PA5
SKU: SF-DEV-11814 | Brand: SparkFun
The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily fo...
Delivered by Wed 10 Jun
SparkFun SOIC to DIP Adapter - 28-Pin
SKU: SF-BOB-00496 | Brand: SparkFun
The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...
Delivered by Wed 10 Jun
SparkFun RedBot Sensor - Line Follower
SKU: SF-SEN-11769 | Brand: SparkFun
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...
Delivered by Wed 10 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
