Prototyping & Wiring

SKU: SF-DEV-10618 | Brand: SparkFun

The SparkFun Power Driver Shield Kit lets you switch high-current loads directly from your Arduino using six RFP30N06LE N-channel MOSFETs. Connect a computer power supply or other DC source to drive motors, solenoids,...

SKU: PL-1921 | Brand: Pololu

These 2×12-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 24-wire conn...

SKU: PL-1920 | Brand: Pololu

These 1×16-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire c...

SKU: SF-BOB-12886 | Brand: SparkFun

If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breako...

SKU: PL-1915 | Brand: Pololu

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire...

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: PL-1908 | Brand: Pololu

These 1×9-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable nine-wire con...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: PL-3101 | Brand: Pololu

The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on the ATmega32U4 AVR microcontroller from Microchip. It packs 32 KB of flash, 2.5 KB of RAM, and built-in USB into a tiny 1″ × 0.6″ DIP pack...

SKU: PL-1906 | Brand: Pololu

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire co...

SKU: SF-PRT-10450 | Brand: SparkFun

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-DEV-10406 | Brand: SparkFun

This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as wel...

SKU: AF-1885 | Brand: Adafruit

When I was studying power supply electronics in school, the instructor always talked about adding BFC's to the circuit - Big Freakin' Capacitors. This here is UHFC - Unbelievably Huge Freaking Capacitor. If you have a...

SKU: SF-SEN-12784 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 use...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: SF-DEV-12761 | Brand: SparkFun

The SparkFun microSD Shield gives your Arduino mass-storage capability via a microSD card slot, making it ideal for data-logging and projects that need to read or write files. Communication with the microSD card uses...

SKU: AF-1816 | Brand: Adafruit

A 10-segment LED bar graph display in white. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even glow acro...

SKU: SF-PRT-10359 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on ...

SKU: SF-PRT-12753 | Brand: SparkFun

A 6-pin analog (RH) British Telecom connector in the BTA female format, commonly used for Vernier analog sensor interfaces. Similar to RJ11 connectors but with a side-mounted lock instead of a bottom hook, the BTA is ...

SKU: SF-SEN-12728 | Brand: SparkFun

Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...