Prototyping & Wiring
Everything you need to wire up, connect, and house your electronics projects — all in one place. From breadboards and jumper wires to breakout boards, crimp connectors, headers, and project enclosures, this collection covers the essentials for hobbyists, students, and professionals alike.
Whether you're prototyping a new circuit, organising your bench, or building a finished STEM project, you'll find the right cables, connectors, and storage solutions here. Shipped Australia-wide from our Sydney warehouse.
USB Male to USB Female + MicroUSB + USB-C
SKU: LB-LS4167 | Brand: Little Bird
This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a ...
Delivered by Thu 13 Aug
Mini Vibration Motor (10*2.7mm)
SKU: DF-FIT0774 | Brand: DFRobot
A compact coin-type vibration motor measuring just 10 × 2.7 mm — roughly the size of a fingernail. It delivers strong vibration with low noise and operates across a 1.5–4.2 V range, with vibration intensity increasing...
Delivered by Thu 13 Aug
Gravity: Expansion Board for Raspberry Pi Pico
SKU: DF-DFR0848 | Brand: DFRobot
A Gravity-compatible expansion board for the Raspberry Pi Pico, breaking out all GPIO pins to labelled female headers and Gravity-standard 3-pin connectors. Provides plug-and-play access to 13 digital I/O, 3 analogue ...
Delivered by Thu 13 Aug
Breadboard Power Supply Module
SKU: LB-LR0186 | Brand: Little Bird
This is a simple breadboard power supply module that is capable of 7-12V input voltage and selectable outputs (5V or 3.3V) regulated voltage. All headers are 0.1" pitch for simple insertion into a 400 point b...
Delivered by Thu 13 Aug
Lead CAT 5E 1m
SKU: ET-1734943 | Brand: Little Bird
Description: This 1m Cat5 lead is perfect for all your Raspberry Pi networking needs. Features: LEAD, CAT 5E, 1M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Imperial: 3.2...
Delivered by Thu 13 Aug
5mm LED 500 Pack Multicolour
SKU: LB-LR0271 | Brand: Little Bird
A bulk pack of 500 standard 5 mm through-hole LEDs in five colours — perfect for classrooms, makerspaces, LED throwies, and any project that needs a large quantity of indicator lights on hand. Key Features 500 LEDs...
Delivered by Thu 13 Aug
Rocker Switch: 3-Pin, SPDT, 10A
SKU: PL-1406 | Brand: Pololu
This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.
Delivered by Thu 13 Aug
1m USB A male to Micro-B Lead
SKU: ET-2085464 | Brand: Little Bird
A 1-metre USB Type-A male to Micro-B male cable for powering and connecting devices such as Raspberry Pi, Arduino, and other microcontrollers. Suitable for both data transfer and power delivery via any standard USB po...
Delivered by Thu 13 Aug
Micro B USB In-line Power Switch Cable (Female to Male)
SKU: LB-PT-MICROUSB | Brand: Little Bird
This microUSB extender has a female microUSB at one and and male microUSB at the other end. You can use the inline switch to power on or off your device without having to keep unplugging it.This works with the R...
Delivered by Thu 13 Aug
Temperature and Humidity Sensor Module DHT11
SKU: LB-LR0029 | Brand: Little Bird
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption...
Delivered by Thu 13 Aug
Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25
SKU: AF-2780 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon ...
Delivered by Thu 13 Aug
XL Raspberry Pi 4 Heatsink - Black
SKU: LB-PT-HEATSINK-BL | Brand: Little Bird
An extra-large aluminium heatsink for the Raspberry Pi 4, featuring 98 low-profile fins for maximum heat dissipation. At just 5 mm tall, it fits under most HATs, giving you passive cooling without limiting expansion o...
Delivered by Thu 13 Aug
Teensy 4.1 (Headers)
SKU: SF-DEV-16996 | Brand: SparkFun
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and t...
Delivered by Thu 13 Aug
Micro USB Cable
SKU: DF-FIT0265 | Brand: DFRobot
Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...
Delivered by Thu 13 Aug
SparkFun Load Cell Amplifier - HX711
SKU: SF-SEN-13879 | Brand: SparkFun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...
Delivered by Thu 13 Aug
JST 2-pin cable
SKU: AF-261 | Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...
Delivered by Thu 13 Aug
Super Bright LED - White 10mm - 10 pack
SKU: SF-COM-11118 | Brand: SparkFun
Super bright 10 mm white through-hole LEDs with high luminous output of 16,000–20,000 mcd. Their large size and narrow 30° viewing angle make them ideal for focused lighting, indicators, and decorative projects. Spec...
Delivered by Thu 13 Aug
TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
SKU: DF-SER0043 | Brand: DFRobot
INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...
Delivered by Thu 13 Aug
Raspberry Pi 400 GPIO Header Adapter, Header Expansion
SKU: WS-18994 | Brand: Waveshare
A GPIO header adapter designed specifically for the Raspberry Pi 400. It connects to the Pi 400's rear GPIO header and provides a standard 40-pin breakout, making it easy to attach HATs, breadboards, and other expansi...
Delivered by Thu 13 Aug
Multiple USB Card Reader , 4 IN 1 (Iphone, Micro, SD , Type C)
SKU: LB-LS1938 | Brand: Little Bird
Unlock the versatility of your devices with the 4-in-1 iPhone Multiple USB Card Reader! This compact and efficient card reader is designed to seamlessly connect to your iPhone, Android, and USB-C devices, making it a ...
Delivered by Thu 13 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
