Prototyping & Wiring
Everything you need to wire up, connect, and house your electronics projects — all in one place. From breadboards and jumper wires to breakout boards, crimp connectors, headers, and project enclosures, this collection covers the essentials for hobbyists, students, and professionals alike.
Whether you're prototyping a new circuit, organising your bench, or building a finished STEM project, you'll find the right cables, connectors, and storage solutions here. Shipped Australia-wide from our Sydney warehouse.
Breadboard Power Supply Module
SKU: LB-LR0186 | Brand: Little Bird
This is a simple breadboard power supply module that is capable of 7-12V input voltage and selectable outputs (5V or 3.3V) regulated voltage. All headers are 0.1" pitch for simple insertion into a 400 point b...
Delivered by Tue 13 Oct
5mm LED 500 Pack Multicolour
SKU: LB-LR0271 | Brand: Little Bird
A bulk pack of 500 standard 5 mm through-hole LEDs in five colours — perfect for classrooms, makerspaces, LED throwies, and any project that needs a large quantity of indicator lights on hand. Key Features 500 LEDs...
Delivered by Tue 13 Oct
Temperature and Humidity Sensor Module DHT11
SKU: LB-LR0029 | Brand: Little Bird
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption...
Delivered by Tue 13 Oct
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
SKU: AF-4397 | Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2m...
Delivered by Tue 13 Oct
Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25
SKU: AF-2780 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon ...
Delivered by Tue 13 Oct
Little Bird PN532 NFC MODULE
SKU: LB-LR0214-148A | Brand: Little Bird
This PN532-based NFC module is designed for near field communication projects in the 13.56MHz range, with a maximum communication distance of 30mm.The board includes its own antenna and can communicate via SPI, IIC (I...
Delivered by Tue 13 Oct
Micro USB Cable
SKU: DF-FIT0265 | Brand: DFRobot
Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...
Delivered by Tue 13 Oct
JST 2-pin cable
SKU: AF-261 | Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...
Delivered by Tue 13 Oct
TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
SKU: DF-SER0043 | Brand: DFRobot
INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...
Delivered by Tue 13 Oct
Raspberry Pi 400 GPIO Header Adapter, Header Expansion
SKU: WS-18994 | Brand: Waveshare
A GPIO header adapter designed specifically for the Raspberry Pi 400. It connects to the Pi 400's rear GPIO header and provides a standard 40-pin breakout, making it easy to attach HATs, breadboards, and other expansi...
Delivered by Tue 13 Oct
Multiple USB Card Reader , 4 IN 1 (Iphone, Micro, SD , Type C)
SKU: LB-LS1938 | Brand: Little Bird
Unlock the versatility of your devices with the 4-in-1 iPhone Multiple USB Card Reader! This compact and efficient card reader is designed to seamlessly connect to your iPhone, Android, and USB-C devices, making it a ...
Delivered by Tue 13 Oct
10M Ohm 0.25 Watt Carbon Film Resistors - Pack of 10
SKU: LB-10M-RESISTOR | Brand: Little Bird
A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...
Delivered by Tue 13 Oct
Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H
SKU: AF-3421 | Brand: Adafruit
The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to ...
Delivered by Tue 13 Oct
Passive Buzzer
SKU: LB-LR0289 | Brand: Little Bird
This passive buzzer is a simple sound-making component for Arduino, microcontroller and electronics projects. Unlike an active buzzer, it needs a changing signal to produce sound rather than generating a tone automati...
Delivered by Tue 13 Oct
WS2812 5050 RGB LED Ring 24 Lights
SKU: LB-LS2225-R-24 | Brand: Little Bird
A ring of 24 individually addressable WS2812 RGB LEDs in the 5050 package. Each LED contains an integrated driver chip, so only a single data pin is needed to control all 24 LEDs from your microcontroller. The rings ...
Delivered by Tue 13 Oct
UV Ultraviolet Ray Detection Sensor
SKU: LB-LS2299 | Brand: Little Bird
A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...
Delivered by Tue 13 Oct
RGB LEDs 10mm x 20
SKU: LB-LS0014 | Brand: Little Bird
Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 /...
Delivered by Tue 13 Oct
WiFi Module ESP8266 ESP-01
SKU: LB-LR0307 | Brand: Little Bird
Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...
Delivered by Tue 13 Oct
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6 (RPi 3, RPi2, B+)
SKU: SF-CAB-13028 | Brand: SparkFun
This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you roo...
Delivered by Tue 13 Oct
RGB LED Module
SKU: LB-LR0013 | Brand: Little Bird
This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour ch...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
