Prototyping & Wiring
Everything you need to wire up, connect, and house your electronics projects — all in one place. From breadboards and jumper wires to breakout boards, crimp connectors, headers, and project enclosures, this collection covers the essentials for hobbyists, students, and professionals alike.
Whether you're prototyping a new circuit, organising your bench, or building a finished STEM project, you'll find the right cables, connectors, and storage solutions here. Shipped Australia-wide from our Sydney warehouse.
Delivered by Tue 13 Oct
Rubber wheels 30mm x 4 units
SKU: LB-LS3917 | Brand: Little Bird
4 Wheel Set Get your next robotics project in motion with the 4 Wheel Set—an essential component for any small robot or moving platform. Designed with both form and function in mind, this set of four wheels is perfec...
Delivered by Tue 13 Oct
Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 1300mm
SKU: AF-5396 | Brand: Adafruit
The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between...
Delivered by Tue 13 Oct
RJ-45 Ethernet Round Panel Mount Extension Cable - 30cm
SKU: AF-4215 | Brand: Adafruit
Add a panel-mount Ethernet port to any enclosure without cutting custom shapes. This RJ-45 round panel mount extension cable fits a standard ~30 mm round hole — just drill with a common hole saw, unscrew the plastic n...
Delivered by Tue 13 Oct
Adafruit DS3231 Precision RTC - STEMMA QT
SKU: AF-5188 | Brand: Adafruit
The Adafruit DS3231 Precision RTC with STEMMA QT connectors is a highly accurate I2C real-time clock featuring an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an exte...
Delivered by Tue 13 Oct
RP2040-Plus, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Plus ver.
SKU: WS-20290 | Brand: Waveshare
The RP2040-Plus is a Pico-compatible development board based on the Raspberry Pi RP2040 microcontroller, upgraded with 4 MB onboard flash, a USB-C connector, and a lithium battery charge/discharge header for portable ...
Delivered by Tue 13 Oct
12mm Momentary Push Button Dome - Black
SKU: LB-LR0589-BLACK | Brand: Little Bird
A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in black. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the pan...
Delivered by Tue 13 Oct
12mm Momentary Push Button Dome - Red
SKU: LB-LR0589-RED | Brand: Little Bird
A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel...
Delivered by Tue 13 Oct
2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible
SKU: AF-4873 | Brand: Adafruit
A matching pair of 3-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...
Delivered by Tue 13 Oct
Adafruit Sensirion SHT40 Temperature Humidity Sensor - STEMMA QT / Qwiic
SKU: AF-4885 | Brand: Adafruit
The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor famil...
Delivered by Tue 13 Oct
Micro:bit silicone case compatible with V1.5/ V2 board - Yellow
SKU: YH-6000300964 | Brand: Little Bird
This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone...
Delivered by Tue 13 Oct
TPBot STEM Car - micro bit robot
SKU: EF-EF08230 | Brand: ElecFreaks
TP Bot is a smart programming car for micro:bit. Can it be considered a different robot car because of its pre-defined functions that don't require a micro:bit? It can also be used as a teaching tool at the same time,...
Delivered by Tue 13 Oct
520PCS 2.54mm Jumper Pin Housing Header Crimp Connector Kit
SKU: LB-LS2238 | Brand: Little Bird
This 520-piece connector kit contains everything you need to make custom 2.54mm (0.1″) Dupont-style jumper wires and harnesses. It includes a comprehensive selection of single-row and dual-row housings from 1-pin to 2...
Delivered by Tue 13 Oct
Temperature Sensor Module DS18B20
SKU: LB-24-TEMP | Brand: Little Bird
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...
Delivered by Tue 13 Oct
Maker Case 12cm
SKU: LB-MAKER-ORANGE | Brand: Little Bird
This compact zippered pouch is designed for carrying small electronics on the go. It fits boards like the Raspberry Pi, micro:bit, Arduino Nano, and similar single-board computers or microcontrollers, helping keep the...
Delivered by Tue 13 Oct
MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface
SKU: AF-935 | Brand: Adafruit
The MCP4725 breakout board provides a 12-bit digital-to-analogue converter (DAC) over I2C. Send a digital value and the VOUT pin outputs the corresponding analogue voltage — ideal for generating waveforms, adjustable ...
Delivered by Tue 13 Oct
5M Flexible el wire with battery holder 5mm - Blue
SKU: LB-LR0335-B | Brand: Little Bird
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...
Delivered by Tue 13 Oct
5M Flexible el wire with battery holder 5mm - Pink
SKU: LB-LR0335-PI | Brand: Little Bird
This 5-metre length of EL wire (electroluminescent wire) glows a vibrant pink when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar...
Delivered by Tue 13 Oct
Little Bird L3G4200D based 3 Axis Gyro
SKU: LB-LR0401 | Brand: Little Bird
This compact module is built around the L3G4200D, a low-power 3-axis angular rate sensor with temperature data output. It measures the rate of change in rotation on the X, Y and Z axes, making it useful for motion sen...
Delivered by Tue 13 Oct
Red Wire Wrap Wire on Spool 250m 30AWG
SKU: LB-LS0153R | Brand: Little Bird
Red Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
