Prototyping & Wiring

SKU: SF-COM-21311 | Brand: SparkFun

A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable ...

SKU: AF-5699 | Brand: Adafruit

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough,...

SKU: WS-21443 | Brand: Waveshare

A USB-to-UART communication module based on the CH343G chip, offering data rates up to 6 Mbps via a USB-C connector. It supports selectable TTL output levels (3.3 V or 5 V) and works across Windows, macOS, Linux, and ...

SKU: AF-5346 | Brand: Adafruit

The Adafruit MCP23017 I2C GPIO Expander Breakout adds 16 extra GPIO pins to any microcontroller or microcomputer over I2C. Each pin can be configured as a digital output (driving up to 25 mA — perfect for LEDs) or as ...

SKU: AF-4401 | Brand: Adafruit

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching fe...

SKU: LB-LS2788 | Brand: Little Bird

A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to...

SKU: LB-LR0024 | Brand: Little Bird

The rotary encoder is an electro-mechanical switch. Its output signal can be used to determine the direction that its knob is being rotated. Not only that, but it is also capable of continuous rotation, unlike a regul...

SKU: PL-1702 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) fefemale headers, connectors, and solderless breadboards and breadboards. The assortm...

SKU: LB-LS0199 | Brand: Little Bird

A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Feature...

SKU: LB-LR0293-29 | Brand: Little Bird

These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, C...

SKU: LB-LR0293-30 | Brand: Little Bird

These compact jumper cables feature a premium male header pin on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit,...

SKU: SF-PRT-12044 | Brand: SparkFun

This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumpe...

SKU: SF-BOB-12009 | Brand: SparkFun

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...

SKU: AF-64 | Brand: Adafruit

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to...

SKU: SF-DEV-11235 | Brand: SparkFun

The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mountin...

SKU: SF-ROB-13259 | Brand: SparkFun

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...

SKU: DF-KIT0021 | Brand: DFRobot

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...

SKU: PL-1901 | Brand: Pololu

These 1×2-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...

SKU: AF-1950 | Brand: Adafruit

Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts...

SKU: AF-1956 | Brand: Adafruit

A pack of 20 premium male-to-male jumper wires in a convenient ribbon cable format. Each wire is 75 mm (3") long with 0.1" (2.54 mm) male header contacts on both ends, fitting cleanly onto standard-pitch headers. The...