Prototyping & Wiring
Everything you need to wire up, connect, and house your electronics projects — all in one place. From breadboards and jumper wires to breakout boards, crimp connectors, headers, and project enclosures, this collection covers the essentials for hobbyists, students, and professionals alike.
Whether you're prototyping a new circuit, organising your bench, or building a finished STEM project, you'll find the right cables, connectors, and storage solutions here. Shipped Australia-wide from our Sydney warehouse.
Thin Speaker - 4 Ohm, 2.5W, 28mm
SKU: SF-COM-21311 | Brand: SparkFun
A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable ...
Delivered by Tue 13 Oct
Raspberry Pi Debug Probe Kit
SKU: AF-5699 | Brand: Adafruit
The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough,...
Delivered by Tue 13 Oct
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
SKU: AF-4401 | Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching fe...
Delivered by Tue 13 Oct
100pcs Solder Seal Heat Shrink Tube Butt Wire Connector Terminal Waterproof 4 Size
SKU: LB-LS2788 | Brand: Little Bird
A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to...
Delivered by Tue 13 Oct
Mini HDMI to HDMI Cable
SKU: DF-FIT0543 | Brand: DFRobot
A 1.5 m Mini HDMI to standard HDMI cable for connecting devices with a Mini HDMI port to monitors, TVs, and projectors. Gold-plated connectors resist oxidation for reliable, long-lasting connections, and the shielded ...
Delivered by Tue 13 Oct
Rotary Encoder Module
SKU: LB-LR0024 | Brand: Little Bird
The rotary encoder is an electro-mechanical switch. Its output signal can be used to determine the direction that its knob is being rotated. Not only that, but it is also capable of continuous rotation, unlike a regul...
Delivered by Tue 13 Oct
Premium Jumper Wire 50-Piece Rainbow Assortment M-M 6
SKU: PL-1702 | Brand: Pololu
These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) fefemale headers, connectors, and solderless breadboards and breadboards. The assortm...
Delivered by Tue 13 Oct
160 pcs 5mm 8 Colours Tactile Push Button
SKU: LB-LS0199 | Brand: Little Bird
A colourful assortment of 160 miniature tactile push buttons in eight different colours, neatly organised in a handy storage container. Perfect for adding colour-coded inputs to your electronics projects. Key Feature...
Delivered by Tue 13 Oct
Alligator to Jumper Female 20cm 10 pin
SKU: LB-LR0293-29 | Brand: Little Bird
These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, C...
Delivered by Tue 13 Oct
Alligator to Jumper Male 20cm 10 pin
SKU: LB-LR0293-30 | Brand: Little Bird
These compact jumper cables feature a premium male header pin on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit,...
Delivered by Tue 13 Oct
Third Hand
SKU: SF-TOL-09317 | Brand: SparkFun
This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but so...
Delivered by Tue 13 Oct
SparkFun Logic Level Converter - Bi-Directional
SKU: SF-BOB-12009 | Brand: SparkFun
The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...
Delivered by Tue 13 Oct
Half-size breadboard
SKU: AF-64 | Brand: Adafruit
This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to...
Delivered by Tue 13 Oct
Wheel - 65mm (Rubber Tire, Pair)
SKU: SF-ROB-13259 | Brand: SparkFun
These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...
Delivered by Tue 13 Oct
Waterproof DS18B20 Sensor Kit
SKU: DF-KIT0021 | Brand: DFRobot
A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...
Delivered by Tue 13 Oct
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack
SKU: PL-1901 | Brand: Pololu
These 1×2-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable...
Delivered by Tue 13 Oct
Premium Female/Female Jumper Wires - 20 x 6 (150mm)
SKU: AF-1950 | Brand: Adafruit
Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts...
Delivered by Tue 13 Oct
Premium Male/Male Jumper Wires - 20 x 3 (75mm)
SKU: AF-1956 | Brand: Adafruit
A pack of 20 premium male-to-male jumper wires in a convenient ribbon cable format. Each wire is 75 mm (3") long with 0.1" (2.54 mm) male header contacts on both ends, fitting cleanly onto standard-pitch headers. The...
Delivered by Tue 13 Oct
High quality type C OTG Adapter splitter USB C Female and USB A Female
SKU: LB-1601201 | Brand: Little Bird
Type-C OTG Adapter Splitter – USB-C & USB-A Power and Data Adapter Expand the versatility of your laptop, smartphone, or tablet with the Type-C OTG Adapter Splitter. Designed for seamless connectivity. Charge your dev...
Delivered by Tue 13 Oct
Automatic Fish Feeder Rechargeable
SKU: LB-FISH-FEED | Brand: Little Bird
Introducing the perfect solution for busy fish owners - the Automatic Fish Feeder Rechargeable! This handy device is designed to keep your aquarium fish fed and happy even when you're away. With a large 100ML capacity...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
