Prototyping & Wiring

SKU: SF-COM-11508 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-fri...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: AF-4384 | Brand: Adafruit

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It supports stereo headphone and stereo line-level output, and also ster...

SKU: PH-105820 | Brand: PiHut

The FLIRC case for the Raspberry Pi 5 combines a sleek aluminium top with an ABS plastic base for effective passive cooling and a premium look. The included ARCTIC thermal pad transfers heat from the CPU to the alumin...

SKU: AF-5046 | Brand: Adafruit

The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: LB-LS3450 | Brand: Little Bird

A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances,...

SKU: AF-4853 | Brand: Adafruit

This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you ...

SKU: DF-FIT0641 | Brand: DFRobot

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson...

SKU: AF-4756 | Brand: Adafruit

The Adafruit LTC4311 Active Terminator solves a common I2C problem: running long cables. Standard I2C is designed for short PCB-level connections, but cable capacitance and resistance degrade signals over distance. Th...

SKU: LB-LR0045 | Brand: Little Bird

Easily add SD card read/write capabilities to your Arduino projects with this SD card interface module. Designed for simple integration, this module breaks out the standard SD card slot and allows your Arduino to rea...

SKU: DF-FIT0533 | Brand: DFRobot

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection. The enclo...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: DF-FIT0502 | Brand: DFRobot

INTRODUCTION FIT0502(Stereo Enclosed Speaker) is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size ...

SKU: LB-BK-356 | Brand: Little Bird

A 10-pack of 10 kΩ trim potentiometers, perfect for breadboarding and prototyping. They feature a long, grippy adjustment knob and 0.1″ pin spacing that plugs directly into breadboards or perfboards with ease. Specif...

SKU: SF-PRT-13925 | Brand: SparkFun

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...

SKU: WS-30952 | Brand: Waveshare

Transform into the digital age and refine your Raspberry Pi 5 setup with the technologically advanced ARGON ONE V5 Case – the ultimate protective enclosure that enhances both functionality and aesthetics! Crafted from...

SKU: SF-DEV-20360 | Brand: SparkFun

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, an...

SKU: LB-LS1374 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...