Prototyping & Wiring

SKU: SF-PRT-08023 | Brand: SparkFun

Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: DF-DFR0260 | Brand: DFRobot

The Arduino DMX Shield is a low-cost, high-quality interface that connects your Arduino to DMX512 lighting networks. Built around the MAX485 transceiver and equipped with NEUTRIK XLR 3-pin connectors (one male, one fe...

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: AF-254 | Brand: Adafruit

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease ...

SKU: SF-CAB-13243 | Brand: SparkFun

This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals...

SKU: AF-400 | Brand: Adafruit

Breakaway header is like the duct tape of electronics, and this header is one better with extra long pins on both sides. This makes it great for connecting things together that have two sockets - especially sold...

SKU: AF-3263 | Brand: Adafruit

The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +18...

SKU: SF-PRT-10651 | Brand: SparkFun

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which...

SKU: AF-1979 | Brand: Adafruit

This extra-tall, extra-long 2x20 female stacking header lets you add multiple plates, breakouts and other boards to a Raspberry Pi with a 40-pin GPIO header.The female header section is made taller to help an attached...

SKU: AF-878 | Brand: Adafruit

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you...

SKU: SF-PRT-14493 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limite...

SKU: WS-31436 | Brand: Waveshare

Expand your Raspberry Pi 5 with high-speed storage and extra USB connectivity using this PCIe HAT+ board. It connects to the Pi 5’s 16PIN PCIe interface with the included cable, adding an M.2 NVMe slot plus four USB 3...

SKU: DF-DFR0876 | Brand: DFRobot

The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a se...

SKU: LB-1601217817192 | Brand: Little Bird

This HDMI splitter cable takes a single HDMI source and mirrors it to two displays simultaneously. It features gold-plated connectors for reliable signal transfer and foil shielding to reduce electromagnetic and radio...

SKU: DF-DFR0706-EN | Brand: DFRobot

UNIHIKER is a compact single-board computer with a built-in 2.8-inch touchscreen, Wi-Fi, and Bluetooth. It features an array of on-board sensors — light sensor, accelerometer, gyroscope, and microphone — along with a ...

SKU: SF-DEV-22633 | Brand: SparkFun

Arduino empowers makers’ creativity and passion for innovation with a robust new board that’s perfect for all users, from beginners to experts – allowing anyone to easily connect to the internet and create IoT proj...

SKU: SF-PRT-21870 | Brand: SparkFun

A simple plug and play USB C to A converter (and vice-versa). This allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Type C port. It features up to USB 3.1 s...

SKU: AF-5664 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH...

SKU: MG-980-0529 | Brand: Little Bird

Speed into STEAM with this indi kit designed to engage kids ages 4+ in hours of exciting exploratory learning and play at home. Perfect forparents, grandparents, caretakers, or anyone looking to equip their young lear...

SKU: DF-DFR0759 | Brand: DFRobot

This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to a main-controller, which allows you easily to hook up multiple I2C devices in project building, for instance, use Gravity-4P I2C/UART sen...