Power Supplies

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: DF-DFR0667 | Brand: DFRobot

This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantee...

SKU: DF-DFR0753 | Brand: DFRobot

This high-power DC-DC buck converter steps a 6V to 14V input down to a steady 5V output, with up to 8A available for demanding 5V projects.Its compact body, strong heat dissipation and high conversion ratio make it a ...

SKU: AF-4237 | Brand: Adafruit

A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics p...

SKU: DF-DFR0831 | Brand: DFRobot

INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, lar...

SKU: DF-FIT0110 | Brand: DFRobot

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel ...

SKU: AF-2750 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about...

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: DF-DFR0205 | Brand: DFRobot

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output voltage with the conv...

SKU: AF-354 | Brand: Adafruit

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provid...

SKU: AF-368 | Brand: Adafruit

A simple adapter that converts a 2.1 mm DC barrel jack to screw terminals, making it easy to connect a DC power supply to boards or projects that lack a DC jack. The terminals are labelled with positive and negative p...

SKU: RP-SC0749 | Brand: Raspberry Pi Ltd

The official power supply for the Raspberry Pi Build HAT. This 48W adapter provides sufficient power to run both your Raspberry Pi and connected LEGO® Technic™ motors and sensors through the Build HAT's barrel jack co...

SKU: RP-SC1677 | Brand: Raspberry Pi Ltd

Many of our favourite Raspberry Pi applications, from garden webcams to industrial controllers, involve putting our products in out-of-the-way locations, where they act as a bridge between the network and the physical...

SKU: ET-2815910 | Brand: Little Bird

An Australian-certified 30W power supply for the NVIDIA Jetson development kits. Delivers 5V at 6A, providing enough power to run your Jetson at full performance without throttling. Specifications Output Voltage – ...

SKU: DF-FIT0151 | Brand: DFRobot

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, ci...

SKU: SF-PRT-10288 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack an...

SKU: AF-3435 | Brand: Adafruit

The Adafruit TPL5110 Low Power Timer Breakout turns any electronics project into a low-power system by periodically switching power on and off. Connect it between your power supply and your project, and the TPL5110 wi...

SKU: SF-TOL-08639 | Brand: SparkFun

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications ...

SKU: AF-369 | Brand: Adafruit

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The termi...

SKU: WS-24760 | Brand: Waveshare

A compact uninterruptible power supply (UPS) module that supports simultaneous charging and power output. When external power is connected, it charges the batteries while providing a stable 5V output. If external powe...