Power Management

SKU: AF-1944 | Brand: Adafruit

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost...

SKU: WS-23884 | Brand: Waveshare

Uninterruptible Power Supply (UPS) Module, Supports charging And Power output at the same time, 3S & 5V 5A Output Uninterruptible Power Supply Module 3S  Supports charging and power output at the same time, 3S *...

SKU: AF-3435 | Brand: Adafruit

The Adafruit TPL5110 Low Power Timer Breakout turns any electronics project into a low-power system by periodically switching power on and off. Connect it between your power supply and your project, and the TPL5110 wi...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: PR-PIM612 | Brand: Little Bird

A range of compact, convenient USB-C LiPo/LiIon battery chargers, perfect for feeding hungry batteries. We've spent quite a lot of time at Pirate HQ over the last few weeks figuring out ways to charge up batteries fo...

SKU: MM-SKU00074 | Brand: Monk Makes

The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit. This tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to powe...

SKU: EF-EF03410 | Brand: ElecFreaks

A dedicated power supply module for the BBC micro:bit that provides a stable 3.3V output at up to 2A. Connects directly to the micro:bit's battery connector, delivering stronger and more consistent power than standard...

SKU: PL-2855 | Brand: Pololu

The D24V22Fx family of step-down voltage regulators generates lower output voltages from input voltages as high as 36 V. They are synchronous switching regulators (also called switched-mode power supplies (SMPS) or DC...

SKU: PL-2097 | Brand: Pololu

The compact (0.4″ × 0.5″) D24V3F3 switching step-down (or buck) voltage regulator takes an input voltage between 4.3 V and 42 V and efficiently reduces it to 3.3 V while allowing for a maximum output current of 300...

SKU: AF-4779 | Brand: Adafruit

This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector w...

SKU: KI-2271 | Brand: Kitronik

A compact 2×AAA battery cage with a JST PH connector and 145 mm colour-coded leads. Designed to plug directly into the BBC micro:bit's battery socket, providing a portable power source for classroom projects and weara...

SKU: TB-MB3826 | Brand: Jaycar

With this Powertech Slim Powerbank, you can charge your smartphone, tablet, smartwatch and other portable devices while on the go without worrying about running out of power. Its small and slim design makes it easy to...

SKU: PI-COM2003 | Brand: Pimoroni

Safety first kids! Resettable fuses are used to protect against over current faults in electrical circuits providing an extra level of protection against shorts or miswiring. Often placed on the power input of a ci...

SKU: PL-2811 | Brand: Pololu

The Mini MOSFET Slide Switch is a compact, breadboard-compatible power switch module that uses a pair of P-channel MOSFETs to deliver continuous currents up to 4.3 A at 4.5–32 V. It features built-in reverse-voltage p...

SKU: PL-2453 | Brand: Pololu

A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...

SKU: PL-2449 | Brand: Pololu

This connector adapts a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled positive and negative, with the positive termi...

SKU: PL-1161 | Brand: Pololu

A battery holder for eight AA cells, arranged as two back-to-back four-cell holders. Provides up to 12V (with alkaline cells) in a compact, stackable form factor. Specifications Cell Type – AA Capacity – 8 cells ...

SKU: AF-317 | Brand: Adafruit

A small, portable inverter for EL wire. Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our high-brightness EL wire for 10 hours. There is a button for selecting steady/bli...

SKU: AF-352 | Brand: Adafruit

Warning: This power supply ships with a US/Canada/Japan plug. It is not certified for use in Australia. You can use a plug adapter or replace the cable with a standard figure-8 (IEC C7) cable. A high-capacity 12V 5...

SKU: AF-4192 | Brand: Adafruit

A slim, open-top 2×AAA battery holder with a genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and boards with JST ...