Power Management

SKU: DF-DFR0528 | Brand: DFRobot

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain peri...

SKU: AF-4920 | Brand: Adafruit

This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. It's great for supplying power to hungry 3.3V voltage circuits from a range o...

SKU: AF-5757 | Brand: Adafruit

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids...

SKU: DF-DFR1026 | Brand: DFRobot

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity in...

SKU: DF-DFR0494 | Brand: DFRobot

An uninterruptible power supply HAT for Raspberry Pi that provides steady power during outages, protecting your system from damage and ensuring safe shutdown. Ideal for mobile applications like Raspberry Pi cameras, t...

SKU: TB-MB3703 | Brand: Little Bird

This 4-channel universal charger handles Ni-MH, Ni-Cd, Li-ion, and LiFePO4 cells simultaneously across four independent slots. Each battery is monitored individually by a microprocessor with precise Pulse Width Modula...

SKU: AF-4114 | Brand: Adafruit

The Zero2Go Omini is a multi-channel power supply board that sits on top of any Raspberry Pi with a 2×20 header. It accepts up to three separate power inputs and automatically selects the one with the highest voltage,...

SKU: AF-6265 | Brand: Adafruit

This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select any of the available voltages to power a device that expects a 5...

SKU: DF-FIT0993 | Brand: DFRobot

This 30cm cable converts a USB Type-C connection into a 5-pin solderless screw terminal block, making it easy to wire power and data to Type-C devices without soldering or custom connectors. All five Type-C pins are b...

SKU: SF-COM-21337 | Brand: SparkFun

The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. This full-size, 1in. x 1in. version of our buck regulator bo...

SKU: SF-COM-21338 | Brand: SparkFun

The SparkFun 1.8V Buck Regulator Breakout features the AP3429A step-down DC-DC converter, providing a regulated 1.8V output at up to 2A continuous current from a 2.7V to 5.5V input. An enable pin allows the output to ...

SKU: DF-FIT0884 | Brand: DFRobot

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. B...

SKU: AF-5501 | Brand: Adafruit

A re-programmable USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a configurable DC barrel jack output. Programme the built-in PD sink negotiation chip to request 5 V, 7 V, 9...

SKU: SF-COM-18356 | Brand: SparkFun

Who doesn't occasionally need power regulation? We certainly do, so we've designed the SparkFun Buck Regulator Breakout to help us with just such a task. Featuring the AP63203 from Diodes Inc, this breakout board take...

SKU: SF-PRT-26993 | Brand: SparkFun

This compact power-control board gives battery-powered projects a laptop-style on/off button while still allowing your microcontroller to take part in the shutdown process. A quick press turns the system on, another p...

SKU: SF-PRT-27081 | Brand: SparkFun

This board adds a laptop-style power button to your project: a simple press turns the system on, and another press can turn it off cleanly when your microcontroller is involved. If things go wrong, pressing and holdin...