Paper Circuits

SKU: LB-PT101011M | Brand: Little Bird

A 20-metre roll of 5 mm wide copper tape with conductive adhesive backing. The conductive adhesive ensures electrical continuity through the tape, making it ideal for creating low-profile circuit traces, RF shielding,...

SKU: LB-LS5508 | Brand: Little Bird

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: AF-1656 | Brand: Adafruit

3M Z-Axis Conductive Tape (9703) bonds two conductive surfaces together while allowing current to flow through the thickness of the tape — but not along its length or width. This anisotropic conductivity is achieved b...

SKU: LB-RGBLED | Brand: Little Bird

This flashing RGB LED is designed for paper circuits, greeting cards, and craft projects. It automatically cycles through random colour patterns with no programming or microcontroller required — just connect it to a c...

SKU: SF-DEV-14593 | Brand: SparkFun

The Chibi Clip is a clothespin-style mounting accessory for the Chibi Chip microcontroller board. It uses spring tension to press the Chip's electrodes onto copper tape circuits built on paper, allowing quick attachme...