New Arrivals

SKU: AF-5385 | Brand: Adafruit

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...

SKU: AF-5390 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still small...

SKU: SF-SEN-13905 | Brand: SparkFun

The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature in a compact package. This version comes with headers pre-soldered for easy breadboard use or direct wir...

SKU: AF-5358 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with four 0.1" spaced cont...

SKU: AF-5316 | Brand: Adafruit

If you want the look and feel of aeronautical style quick-release connectors, this FGG.0B 5-pin Plug is an elegant and inexpensive alternative to official LEMO-C connectors. Sure, they're not mil-spec but they do work...

SKU: DF-SEN0511 | Brand: DFRobot

This waterproof DS18B20 digital temperature sensor delivers accurate readings over a simple 1-Wire interface, requiring just a single data pin on your microcontroller. The sealed probe and silicone lead wire make it i...

SKU: DF-FIT0791 | Brand: DFRobot

A pack of four coreless micro motors measuring 6 × 12 mm, reaching 50,000 RPM at 3.7V. The slightly longer body compared to the 6 × 10 mm variant provides additional torque, making these motors a good balance of power...

SKU: AF-5048 | Brand: Adafruit

The Power Profiler Kit II is a standalone unit, which can measure and optionally supply currents all the way from sub-uA and as high as 1A on all Nordic DKs, in addition to external hardware. As we've featured on EYE ...

SKU: AF-3888 | Brand: Adafruit

If you want to do more with the BBC micro:bit, getting those pins from the card-edge connector is going to be your first hurdle. Unlike many dev-boards, the micro:bit isn't breadboard friendly. That makes the 'bit dur...

SKU: LB-LS0107 | Brand: Little Bird

These prewired 5 mm warm white LEDs come ready to use with a 20 cm cable attached — no soldering required. With a built-in resistor for 3–12V DC operation, simply connect power and ground to add warm white lighting to...

SKU: SF-COM-18357 | Brand: SparkFun

Who doesn't occasionally need power regulation? We certainly do, so we've designed the SparkFun BabyBuck Regulator Breakout to help us with just such a task. Featuring the AP63203 from Diodes Inc, this breakout board ...

SKU: AF-4960 | Brand: Adafruit

These reverse-mount NeoPixel RGB LEDs (SK6812-E) are designed to be soldered from the top of a PCB and shine through a cutout in the board. This keeps the component side flat and simplifies manufacturing by placing al...

SKU: LB-LS2924 | Brand: Little Bird

RJ45 Male to Female Screw Panel Mount  Extension Cable 30cm

SKU: RP-SC0635 | Brand: Raspberry Pi Ltd

Show your love for the world's favourite single-board computer with this official Raspberry Pi t-shirt in size Large. A great way to represent the Raspberry Pi community at meetups, maker faires, and everyday wear. D...

SKU: SF-WRL-17743 | Brand: SparkFun

The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including t...

SKU: LB-MINI-LED | Brand: Little Bird

4 Random Colour LEDs10K resistors x 51K resistor x 2220ohm resistor x 5

SKU: AF-4852 | Brand: Adafruit

This simple Smoke Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, battery. It's darkened plastic but you can still easil...

SKU: EC-SPM01021S | Brand: Elecrow

This water sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor board has a demension of 5.0 x 4.0cm. There is also a on-boar...

SKU: EC-CBLE2540HM | Brand: Elecrow

The HM-11 is a Bluetooth Low Energy (BLE 4.0) module based on the TI CC2541 microprocessor. It provides wireless communication with smartphones, tablets, desktop computers, and other embedded systems via a simple UART...

SKU: SF-DEV-17284 | Brand: SparkFun

The Raspberry Pi Compute Module 4 (CM4) packs the performance of the Raspberry Pi 4 into a compact system-on-module format. Built on the 64-bit quad-core BCM2711 processor (ARM Cortex-A72 at 1.5 GHz), this variant inc...