New Arrivals

SKU: PH-EP-0219 | Brand: PiHut

The P02 PCIe slot baseboard for Raspberry Pi 5 is designed to convert the Raspberry Pi 5's PCIe into a PCIe x1 slot. This accessory broadens Raspberry Pi's capabilities by enabling the connection of PCIe devices, pro...

SKU: SF-TOL-25571 | Brand: SparkFun

Master the art of soldering with the iFixit Soldering Splint by your side. Compact yet packed with utility, this tool is designed to seamlessly integrate into both intricate electronics soldering projects and those im...

SKU: LB-LS5508 | Brand: Little Bird

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...

SKU: LB-SOLAR-M | Brand: Little Bird

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar proje...

SKU: WS-25093 | Brand: Waveshare

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard vol...

SKU: LB-HAND-CRANK | Brand: Little Bird

Introducing a reliable and multifunctional emergency radio that is perfect for you and your family's safety, no matter the weather conditions or location. This compact radio serves as a weather radio, LED flashligh...

SKU: AF-5616 | Brand: Adafruit

A lever-action wiring block connector with one input and five outputs, ideal for quick power or signal fan-outs without soldering, crimping, or tools. Snap the lever open, insert the wire, and snap it closed for a sec...

SKU: EC-PMMA19005G | Brand: Elecrow

A DC 12 V four-way solenoid valve with one inlet and four independently controlled outlets. Each outlet has its own control wire, so you can open any combination of the four channels — use one at a time or all four si...

SKU: LB-LS3579 | Brand: Little Bird

LM75A Temperature Sensor I2C Interface Development Board Module LM75A is a high-speed I2C interface, temperature sensor, in the temperature range -55 ? ~ + 125. The temperature was directly converted to a digital sign...

SKU: AF-5113 | Brand: Adafruit

Kailh Choc Low Profile Red linear mechanical key switches in a pack of 10. These ultra-low-profile switches are significantly thinner than standard MX-style switches, making them ideal for slim custom keyboards and co...

SKU: LB-LS2977 | Brand: Little Bird

Specification:Model: Mini 130 Vibration MotorMotor size: 25*20mmMotor height: 15.3mmVoltage range: DC 3V-6VRated voltage: DC 3.7VRated current: 0.8AWeight: 26gApplication: It is a Strong Vibration Motor. Packa...

SKU: LB-EAGLED-LED-Y | Brand: Little Bird

EagLED yellow sewable LEDs designed for e-textiles and wearable electronics. These Australian-made LEDs come attached in a strip — simply snap them apart and sew into clothing, accessories, or fabric projects using co...

SKU: DF-DFR0831 | Brand: DFRobot

INTRODUCTIONThis is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports make it suitable for connecting multiple devices like, lar...

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: DF-DFR0768 | Brand: DFRobot

Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player! This MP3 player module supports four controlling modes: Arduino, AT command, on-board buttons, and ADKEY. You can directly press the on-board button...

SKU: SF-PRT-17152 | Brand: SparkFun

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on t...

SKU: DF-ROB0156-B | Brand: DFRobot

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately.Use this kit to change your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! The Maqueen Mechanic-Beetle ki...

SKU: DF-FIT0664 | Brand: DFRobot

This is a Micro-HDMI (M/F) adapter for Raspberry Pi 4B. It supports 4K high resolution, and provides efficient and stable signal transmission without attenuation and delay. Plug and play, easy to use. With this adapte...

SKU: AF-4456 | Brand: Adafruit

A 0.8mm-wide copper desoldering wick for removing excess solder from PCB pads and joints. The narrow width makes it particularly suited for surface-mount (SMT) work, where precision is essential. Place the wick over t...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...