New Arrivals

SKU: SF-PRT-00449 | Brand: SparkFun

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a...

SKU: SF-BOB-00495 | Brand: SparkFun

A simple breakout PCB that adapts a 20-pin SOIC package IC to standard 0.1″ DIP headers for easy breadboard prototyping. Solder your SOIC chip to the board and plug it straight into a breadboard or socket. Key Featur...

SKU: AF-2949 | Brand: Adafruit

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PC...

SKU: SF-PRT-00429 | Brand: SparkFun

A DB9 female serial connector in a right-angle PCB-mount configuration (0.318" style). Ideal for adding a standard RS-232 serial port to custom PCB designs, breakout boards, and embedded systems. Key Features DB9 F...

SKU: SF-SEN-11769 | Brand: SparkFun

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...

SKU: AF-2969 | Brand: Adafruit

The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the white PCB version — identical specs to the black PCB variant, ...

SKU: SF-SEN-11744 | Brand: SparkFun

Need to put your finger on the pulse of the Earth? Did I just blow your mind? A geophone works by translating ground movement into voltage, which can easily be read by a microcontroller. The SM-24 geophone element is ...

SKU: DF-DFR0274 | Brand: DFRobot

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED stri...

SKU: AF-3061 | Brand: Adafruit

The Feather M0 WiFi with uFL pairs the ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 Wi-Fi module, featuring a uFL connector instead of an on-board antenna. This allows you to connect an external 2.4 GHz ant...

SKU: AF-2974 | Brand: Adafruit

This 9×16 Charlieplexed LED matrix features cool white LEDs arranged in a grid designed to pair with the Adafruit IS31FL3731 16×9 Charlieplexed PWM LED Matrix Driver. With 144 individual LEDs in a compact package, it'...

SKU: AF-3060 | Brand: Adafruit

The Adafruit ATWINC1500 WiFi Breakout with uFL Connector adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. This version features a uFL antenna connector instead of an onboar...

SKU: SF-SEN-00251 | Brand: SparkFun

36" high temperature Type-K Thermocouple with glass braid insulation.

SKU: SF-GPS-00177 | Brand: SparkFun

This embedded GPS antenna with built-in LNA (Low Noise Amplifier) is designed for small, mobile applications. Its compact, unpackaged form factor makes it ideal for creating truly small GPS prototypes. Comes with a 5-...

SKU: SF-BOB-11722 | Brand: SparkFun

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...

SKU: DF-DFR0008 | Brand: DFRobot

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface...

SKU: PL-2179 | Brand: Pololu

This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that ...

SKU: AF-3066 | Brand: Adafruit

Learning the Art of Electronics: A Hands-On Lab Course by Thomas C. Hayes and Paul Horowitz is a practical companion to the classic textbook The Art of Electronics. Designed for students with no prior electronics know...

SKU: SF-PRT-00127 | Brand: SparkFun

Do you need a lot of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. TransFlash has now completed standards certification and is now known as microSD. Compatible wit...

SKU: SF-WRL-00144 | Brand: SparkFun

A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-...

SKU: SF-COM-11707 | Brand: SparkFun

Do you fear that your power may not be “far reaching” enough? How would another 6' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 6' of power cable is exactly what your project needs. Do...