New Arrivals

SKU: SF-SEN-11859 | Brand: SparkFun

This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...

SKU: PL-1245 | Brand: Pololu

The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...

SKU: DF-FIT0335 | Brand: DFRobot

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is c...

SKU: PL-1239 | Brand: Pololu

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...

SKU: PL-1242 | Brand: Pololu

The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a si...

SKU: DF-FIT0328 | Brand: DFRobot

A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the disp...

SKU: SF-COM-11853 | Brand: SparkFun

1.0M Ohm, ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). Note: ...

SKU: AF-3596 | Brand: Adafruit

A set of 10 hot air rework nozzles for surface-mount soldering repair. The kit includes five round nozzles in various diameters for general-purpose work, plus five specialty nozzles designed for removing and reworking...

SKU: SF-BOB-11818 | Brand: SparkFun

This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers...

SKU: SF-CAB-00512 | Brand: SparkFun

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino bo...

SKU: SF-DEV-11814 | Brand: SparkFun

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily fo...

SKU: SF-KIT-13863 | Brand: SparkFun

The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces ...

SKU: SF-CAB-00506 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs.Dimensions: 36" Long

SKU: DF-FIT0330 | Brand: DFRobot

Need a clean energy source for your project? Check out this compact,high quality,high output endurable solar panel.The peak power output is around 9V at 220mA.Can also be used in series to work as recharger for 12V b...

SKU: DF-KIT0044 | Brand: DFRobot

This is a DFRobot designed black rubber wheel kit. The custom-designed kit contains two 136mm rubber tires tested over 6 indoor conditions,packed with shaft couplings, two M8 screws and 2 washers. Designed to fi...

SKU: PL-1219 | Brand: Pololu

This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more...

SKU: AF-3055 | Brand: Adafruit

Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry P...

SKU: AF-2954 | Brand: Adafruit

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the black PCB version — the lowest density option in th...

SKU: DF-SEN0164 | Brand: DFRobot

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...

SKU: SF-BOB-00496 | Brand: SparkFun

The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...