New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
XL-MaxSonar-AEL0(MB1360)
SKU: DF-SEN0280 | Brand: DFRobot
The MB1360 XL-MaxSonar-AEL0 sensor features centimeter resolution and a 10Hz read rate, and provides short to long distance detection and range information from 25cm to 1068. This sensor has the widest and most sensit...
Delivered by Wed 1 Jul
SparkFun RedBoard Artemis ATP
SKU: SF-DEV-15442 | Brand: SparkFun
The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the...
Delivered by Wed 1 Jul
SparkFun RedBoard Artemis Nano
SKU: SF-DEV-15443 | Brand: SparkFun
The SparkFun RedBoard Artemis Nano packs the powerful Artemis module into a minimal, 0.8 mm thick PCB with USB-C programming, on-board LiPo battery charging, and a Qwiic connector. It's a compact, modern replacement f...
Delivered by Wed 1 Jul
SparkFun Artemis Module - Low Power Machine Learning BLE Cortex-M4F
SKU: SF-WRL-15484 | Brand: SparkFun
The SparkFun Artemis Module is a compact 10 × 15 mm wireless module built around the Ambiq Apollo3 Cortex-M4F processor with BLE 5.0. Running at 48 MHz (with 96 MHz turbo mode), it draws as little as 6 µA per MHz — ma...
Delivered by Mon 22 Jun
Adafruit AirLift Bitsy Add-On – ESP32 WiFi Co-Processor
SKU: AF-4363 | Brand: Adafruit
Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL ...
Delivered by Fri 10 Jul
HRXL-MaxSonar-WRLT (MB7386)
SKU: DF-SEN0271 | Brand: DFRobot
The weather resistant MB7386 HRXL-MaxSonar-WRLT has millimeter resolution and a 6Hz read rate, and provides short to long distance detection and range information from 500mm to 9999mm for the nearest detectable target...
Delivered by Wed 1 Jul
HRLV-MaxSonar-EZ4 (MB1043)
SKU: DF-SEN0269 | Brand: DFRobot
The HRLV-MaxSonar-EZ4 (MB1043) is a compact ultrasonic range sensor with 1 mm resolution, measuring distances from 300 mm to 5000 mm at a 10 Hz read rate. It features the narrowest beam width in the HRLV-MaxSonar-EZ s...
Delivered by Wed 1 Jul
4-20SC-MaxSonar-WRMI(MB7789)
SKU: DF-SEN0267 | Brand: DFRobot
The MB7789 4-20SC-MaxSonar-WRMI is a rugged, weather-resistant ultrasonic distance sensor with self-cleaning capability, designed for outdoor applications in high-moisture or condensation-prone environments. It provid...
Delivered by Wed 1 Jul
LV-MaxSonar-EZ4(MB1040)
SKU: DF-SEN0275 | Brand: DFRobot
The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...
Delivered by Wed 1 Jul
SparkFun gator:log - micro:bit Accessory Board
SKU: SF-DEV-15270 | Brand: SparkFun
The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process, gone are the days of rushing around with a pen and composition notebook to simultaneously re...
Delivered by Wed 1 Jul
ParkSonar-EZ-144(MB1009)
SKU: DF-SEN0276 | Brand: DFRobot
The MB1009 ParkSonar-EZ-144 is an ultrasonic proximity and range sensor from MaxBotix, designed to detect vehicles within a calibrated detection zone. It reports when a target enters or leaves the zone, with both prox...
Delivered by Wed 1 Jul
HRUSB-MaxSonar-EZ1(MB1413)
SKU: DF-SEN0270 | Brand: DFRobot
The MB1413 HRUSB-MaxSonar-EZ1 has millimeter resolution and a ~4Hz read rate, features a great blend of sensitivity as well as side object rejection, and provides short to long distance detection and range information...
Delivered by Wed 1 Jul
USB-ProxSonar-EZ1(MB1414)
SKU: DF-SEN0279 | Brand: DFRobot
The MB1414 USB-ProxSonar-EZ1 is an ultrasonic proximity and range sensor with a USB interface. It provides both proximity detection (target enter/exit a calibrated zone) and distance measurement with 1-inch resolution...
Delivered by Wed 1 Jul
Adafruit 4x4 NeoTrellis Feather M4 Kit Pack
SKU: AF-4352 | Brand: Adafruit
Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons eac...
Delivered by Fri 10 Jul
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
SKU: AF-4339 | Brand: Adafruit
This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather b...
Delivered by Fri 10 Jul
SmartiPi Touch Back Cover - Small
SKU: AF-3569 | Brand: Adafruit
Need a smart solution for covering the back of your SmartiPi Touch display stand? This simple cover from SmartPi screws into the back VESA mounts on the SmartiPi Touch with the four included screws. It allows you t...
Delivered by Fri 10 Jul
Adafruit PyRuler - Engineer Reference Ruler with CircuitPython
SKU: AF-4319 | Brand: Adafruit
The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component packag...
Delivered by Fri 10 Jul
SparkFun Qwiic Kit for Raspberry Pi
SKU: SF-KIT-15367 | Brand: SparkFun
The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic con...
Delivered by Mon 22 Jun
Roll of Nose Stickers
SKU: LB-NOSE | Brand: Little Bird
Looking for something extra to jazz up your papercraft, cardboard or robotics project? These nose Stickers - they'll will make an excellent addition to your craft supplies! These quirky nose stickers come i...
Delivered by Mon 22 Jun
Roll of Mouth Stickers
SKU: LB-MOUTH | Brand: Little Bird
Add some personality to your papercraft, cardboard, or robotics projects with these fun mouth stickers. Available in a variety of colours and styles, they're perfect for giving your robots, trashbots, and craft creati...
Delivered by Mon 22 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
