New Arrivals

SKU: SF-ROB-14450 | Brand: SparkFun

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-bra...

SKU: AF-3660 | Brand: Adafruit

The BME680 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: AF-3661 | Brand: Adafruit

The Adafruit MiniBoost is a tiny charge-pump voltage booster that converts 3–5 V input to a regulated 5 V output at up to 100 mA. About the size of a linear regulator, it's an easy drop-in solution for battery-powered...

SKU: AF-945 | Brand: Adafruit

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range ...

SKU: PI-IQA002 | Brand: Pimoroni

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instrume...

SKU: SF-WRL-14498 | Brand: SparkFun

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. It works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather infor...

SKU: AF-3663 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-960 | Brand: Adafruit

Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you ...

SKU: SF-DEV-14352 | Brand: SparkFun

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a seri...

SKU: AF-988 | Brand: Adafruit

This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5....

SKU: AF-4053 | Brand: Adafruit

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Ty...

SKU: AF-1001 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...

SKU: AF-1004 | Brand: Adafruit

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED strip and hold securely. They're not waterproof but you could cover t...

SKU: AF-1043 | Brand: Adafruit

A compact aluminium heat sink from Cool Innovations, designed for surface-mount components such as SoCs, motor drivers, and other SMT packages. Trusted by engineers for its low cost, ease of use, and excellent thermal...

SKU: AF-1046 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded yellow-orange LED matrix. Only 1.2" on a side, it is quite visible but not so large it won't plug into a breadboard! There are 16 pins on the si...

SKU: PI-COM0811 | Brand: Pimoroni

A miniature brushed DC motor with an 11:1 metal gearbox, fitted with a solderless push header shim for easy prototyping — no soldering required. Simply connect with jumper wires and you're ready to go. The compact for...

SKU: AF-1074 | Brand: Adafruit

Spring terminal blocks will simplify your wiring and make your project more rugged. Instead of soldering wires to your perf board, solder in these 0.1" pitch terminal blocks. There's a little spring contact so you ...

SKU: TB-ZS5000 | Brand: Little Bird

A 74LS00 quad 2-input NAND gate IC in a through-hole DIP-14 package. Contains four independent 2-input NAND gates, one of the most fundamental building blocks in digital logic design. Key Features Quad 2-Input NAND...

SKU: PI-COM0809 | Brand: Pimoroni

This gearmotor is a miniature brushed DC motor with a metal gearbox available in a range of gearing ratios depending on use.RatioSpeed @ 6VFree-run current @ 6VStall torque @ 6VStall current @ 6V11:11800±10% rpm80m...

SKU: AF-4119 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 1...