New Arrivals

SKU: WS-18995 | Brand: Waveshare

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple t...

SKU: WS-31536 | Brand: Waveshare

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration o...

SKU: LB-1601174027926 | Brand: Little Bird

Upgrade your charging game with our Magnetic Cable 240W Fast Charging USB-C. This cable not only offers lightning-fast charging speeds, but also provides the ultimate convenience with its magnetic design. Crafted...

SKU: PH-ZP-0172 | Brand: PiHut

The Mini Tower Kit from 52Pi is an all-in-one enclosure for the Raspberry Pi 5, featuring an LED ICE Tower cooler, 0.96" OLED display, sturdy ABS frame, and full port access. An updated design based on customer feedba...

SKU: LB-LS5638 | Brand: Little Bird

A 90-degree right-angle Micro USB male-to-female adapter that redirects your cable sideways, reducing strain on the connector and fitting neatly into tight spaces. The male end is right-angled while the female end is ...

SKU: WS-22224 | Brand: Waveshare

A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful...

SKU: AF-5384 | Brand: Adafruit

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...

SKU: LB-MACAW | Brand: Little Bird

The Macaw is a compact programmable RGB LED board with 3 WS2812B LEDs, commonly known as NeoPixels. It is ideal for adding bright, addressable colour effects to small electronics, robotics and classroom projects.Its c...

SKU: LB-EAGLED-LED-B | Brand: Little Bird

Made here in Sydney these are our very own EagLED LED - Blue in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. ...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-00184 | Brand: Little Bird

A 10-wire splittable ribbon jumper cable with a male (pin) connector on one end and a female (socket) connector on the other. Each wire is colour-coded and can be peeled apart individually or in groups to suit your wi...

SKU: PI-CAB0307 | Brand: Pimoroni

This 20 cm flat-flex cable (FFC) connects the Raspberry Pi Camera Module to the CSI port on your Raspberry Pi. A shorter cable is useful for compact builds, enclosures, and projects where the standard 15 cm cable is t...

SKU: LB-PT12114 | Brand: Little Bird

A compact, multi-purpose battery tester that quickly checks the charge level of common household batteries. The colour-coded analogue dial gives you an instant good/low/replace reading — no guessing whether that batte...

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: LB-LS0823 | Brand: Little Bird

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...

SKU: LB-LS0301 | Brand: Little Bird

Soldering Iron Tip Cleaner    There is no water necessary , it can save energy , maintain temperature for the soldering iron to allow for faster work.It cleans better than conventional sponges and wo...

SKU: LB-LR0021 | Brand: Little Bird

High Quality Laser sensor module for Arduino.   Features: Operating Voltage: 5V PCB Size: 15*24 mm Wavelength: 650 nm Depth: 8 mm Height: 24 mm Width: 15 mm Product Weight: 2.2 g

SKU: AF-2130 | Brand: Adafruit

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable ...

SKU: DF-FIT0111 | Brand: DFRobot

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...

SKU: DF-FIT0118 | Brand: DFRobot

This is a set of ceramic capacitors. Very handy for experiments and home cooked circuit board. This pack comes with 25 sets of capacitors with various capacitance and working voltage. SPECIFICATIONSWorking Voltage...