New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
HC-SR04 Ultrasonic Sensor Distance Measuring Module Ultra01+
SKU: EF-EF03085 | Brand: ElecFreaks
The HC-SR04 is a widely used ultrasonic distance sensor that provides non-contact measurement from 2 cm to 450 cm with up to 3 mm resolution. It uses a 40 kHz ultrasonic transducer pair — one transmitter and one recei...
Delivered by Thu 2 Jul
FPC Camera Connector - 24-Pin, 0.5mm (Bottom-Contact)
SKU: SF-COM-16305 | Brand: SparkFun
Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle o...
Delivered by Thu 2 Jul
SparkFun weather:bit - micro:bit Carrier Board (Qwiic)
SKU: SF-DEV-15837 | Brand: SparkFun
The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station. With the weather:bit you will have acces...
Delivered by Thu 2 Jul
Premium Silicone Covered Male-Male Jumper Wires - 200mm x 40
SKU: AF-4482 | Brand: Adafruit
These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...
Delivered by Thu 2 Jul
Gravity: 8-Digital LED Segment Display Module (Red)
SKU: DF-DFR0646-R | Brand: DFRobot
An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and da...
Delivered by Thu 2 Jul
Gravity: 4-Digital LED Segment Display Module (Red)
SKU: DF-DFR0645-R | Brand: DFRobot
A 4-digit 7-segment LED display module from DFRobot's Gravity series. This red LED display communicates over I2C, making it easy to wire up with just two data lines and compatible with a wide range of microcontrollers...
Delivered by Mon 13 Jul
Gravity: 4-Digital LED Segment Display Module (Green)
SKU: DF-DFR0645-G | Brand: DFRobot
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2...
Delivered by Mon 13 Jul
Adafruit 1.3 240x240 Wide Angle IPS TFT Display
SKU: AF-4520 | Brand: Adafruit
The Adafruit 1.3" 240×240 Wide Angle IPS TFT Display is a bare display module — the same screen used in the Adafruit CLUE and Mini PiTFT 1.3". It delivers 240×240 pixels of 16-bit full colour with 80° viewing angles i...
Delivered by Fri 24 Jul
Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
SKU: AF-2598 | Brand: Adafruit
The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n ...
Delivered by Fri 24 Jul
Adafruit eInk Feather Friend with 32KB SRAM
SKU: AF-4446 | Brand: Adafruit
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect you...
Delivered by Fri 24 Jul
Geared DC Motor with Magnetic Encoder Outputs - 7 VDC 1:20 Ratio
SKU: AF-4416 | Brand: Adafruit
This geared DC motor comes with a built-in magnetic encoder — a magnetic wheel and two Hall effect sensors are already attached to the motor body, giving you quadrature feedback for both speed and direction without an...
Delivered by Fri 24 Jul
OCTOPUS 1-Channel Relay
SKU: EF-EF04026 | Brand: ElecFreaks
OCTOPUS 1-Channel Relay is a single relay electronic brick: Note: Module 5V power supply: Never use power supply more than 5V, which may cause damage to the module. Features: Relay Power Supply Voltage:<V Relay dri...
Delivered by Mon 13 Jul
Geekservo Motor compatible with Lego
SKU: EF-EF09087 | Brand: ElecFreaks
The Geekservo Motor is a compact DC motor designed to be fully compatible with LEGO building systems. Its LEGO-compatible mounting points let you integrate motorised movement directly into brick-based builds, making i...
Delivered by Thu 2 Jul
Octopus MQ3 Alcohol Sensor Brick
SKU: EF-EF04060 | Brand: ElecFreaks
The Octopus MQ3 Alcohol Sensor Brick from ElecFreaks is an analogue gas sensor module with high sensitivity to alcohol vapour. It outputs an analogue voltage proportional to the detected alcohol concentration, making ...
Delivered by Mon 13 Jul
Octopus ADKeypad
SKU: EF-EF04017 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...
Delivered by Thu 2 Jul
Ring:bit Car Accessories (Sonar:bit,Tracking Module and LED Light bar)
SKU: EF-EF03435 | Brand: ElecFreaks
An accessory pack for the ElecFreaks Ring:bit Car V2, adding obstacle avoidance, line-following, and colourful LED lighting to your micro:bit-powered car. The kit includes three modules that plug directly into the Rin...
Delivered by Thu 2 Jul
Octopus Passive buzzer Brick OBPB01
SKU: EF-EF04031 | Brand: ElecFreaks
The Octopus Passive Buzzer Brick is a plug-and-play buzzer module from the Elecfreaks Octopus series. Unlike an active buzzer, the passive design lets you control both tone and volume via PWM, making it ideal for gene...
Delivered by Thu 2 Jul
Octopus Alphanumeric LED Brick
SKU: EF-EF04058 | Brand: ElecFreaks
A common cathode alphanumeric LED display module driven by the HT16K33 chip over I2C. The 0.56-inch digit height makes it suitable for displaying letters, numbers, and basic symbols in electronics projects and interac...
Delivered by Thu 2 Jul
Experiment box for micro:bit (with micro:bit)
SKU: EF-EF08199 | Brand: ElecFreaks
ParameterSKU: EF08199/EF08200 The board: micro:bit Coding language: makecode\python\C++ Power supply: 2 x AA Connection line: banana line Size: 25X17.6X...
Delivered by Thu 2 Jul
LED Ring Light - 76mm Diameter
SKU: AF-4433 | Brand: Adafruit
This LED Ring Light is designed for use with microscopes but we kinda like the design and think it could be a really nice LED element for costuming or lighting effects or... something else? Of course you could also ju...
Delivered by Fri 24 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared